Siemens 6AV7285-6KA10-0AA0 SIMATIC IPC277D

Name: Siemens 6AV7285-6KA10-0AA0 SIMATIC IPC277D
Brand: Siemens
SKU: 6AV7285-6KA10-0AA0
Price: 743.00 EUR
Availability: InStock

€ 743,00

Condition

Clear

SKU: 6AV7285-6KA10-0AA0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7285-6KA10-0AA0 is a Panel PC belonging to the SIMATIC IPC277D series, manufactured by Siemens as part of its industrial computing portfolio. This unit is a 15-inch multi-touch panel PC designed for demanding industrial environments, combining HMI functionality with PC-based computing power in a single compact device. It is built to operate reliably in harsh industrial conditions and integrates seamlessly into Siemens automation architectures.

The IPC277D features a 15-inch widescreen TFT display with a projected capacitive (PCT) multi-touch interface, supporting up to 5 simultaneous touch points for intuitive operator interaction. The unit is equipped with an Intel Atom processor, DDR3 RAM, and supports Compact Flash or SSD storage options for robust, vibration-resistant data retention. Communication interfaces include multiple USB ports, dual Gigabit Ethernet ports, and support for PROFINET, enabling direct integration into industrial networks. The front panel meets IP65 protection rating, making it resistant to dust and water ingress from the front side.

The SIMATIC IPC277D is widely deployed in machine building, process automation, and factory automation applications where a combined HMI and PC platform is required. It is particularly suited for use in the food and beverage, automotive, and pharmaceutical industries, where hygienic design and reliable continuous operation are essential. The device runs Windows Embedded Standard 7 or Windows 7 Ultimate, allowing it to host SCADA, WinCC, or other HMI software packages directly on the panel.

Technical Specifications

Display Size	15 inch
Display Type	TFT widescreen
Touch Technology	Projected capacitive (PCT) multi-touch, up to 5 touch points
Processor	Intel Atom
Operating Voltage	24 V DC
Power Consumption	Approx. 60 W
Communication Interface	2x Gigabit Ethernet (RJ45), 4x USB, PROFINET
IP Protection Rating (Front)	IP65
IP Protection Rating (Rear)	IP20
Operating Temperature	0 °C to +50 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5% to 90% (non-condensing)
Mounting	Panel mounting
Operating System	Windows Embedded Standard 7 / Windows 7 Ultimate
Certifications	CE, UL, cULus

Common Error Codes & System Events

Event ID: 41: Kernel power event – the system has rebooted without cleanly shutting down, typically caused by a power loss or system crash.
Check the 24 V DC power supply for stability and adequate current capacity. Review Windows Event Viewer for additional crash details and check for overheating.
Event ID: 1001: Windows Error Reporting event indicating an application or system crash has occurred.
Review the crash dump files in Windows Event Viewer. Update or reinstall the affected application. Check RAM integrity using a memory diagnostic tool.
Event ID: 7036: A service entered the stopped state unexpectedly, which may affect HMI or communication functionality.
Identify the stopped service in the Windows Event Viewer and restart it. Configure the service to restart automatically on failure if appropriate.
Event ID: 6008: The previous system shutdown was unexpected, indicating a possible power interruption or critical system error.
Verify the 24 V DC supply voltage and check UPS functionality if installed. Inspect the system for thermal issues and review event logs for preceding errors.
Event ID: 14: Disk error detected – the device has a bad block or the storage medium is failing.
Run a disk check (chkdsk) on the Compact Flash or SSD. Replace the storage medium if errors persist and restore the system image from backup.
BIOS POST Error: The panel PC fails to complete the Power-On Self-Test during startup, indicating a hardware fault such as failed RAM or corrupted BIOS.
Reseat RAM modules and disconnect peripherals. If the error persists, attempt a BIOS recovery or contact Siemens technical support for hardware replacement.
No Boot Device Found: The system cannot locate a bootable storage device, typically caused by a failed or disconnected Compact Flash card or SSD.
Check that the storage medium is properly seated in its slot. Test the storage device in another system. Replace the Compact Flash or SSD and restore the system image.

Frequently Asked Questions

What is the display size and touch technology used in the 6AV7285-6KA10-0AA0?

This unit features a 15-inch TFT widescreen display with projected capacitive (PCT) multi-touch technology, supporting up to 5 simultaneous touch points.

What operating system does the SIMATIC IPC277D support?

The IPC277D supports Windows Embedded Standard 7 and Windows 7 Ultimate, allowing it to run standard PC software including Siemens WinCC and third-party SCADA applications.

What is the front panel protection rating of this panel PC?

The front panel of the 6AV7285-6KA10-0AA0 meets IP65 protection, making it resistant to dust and water jets, suitable for use in washdown or dusty industrial environments.

What communication interfaces are available on this unit?

The unit provides two Gigabit Ethernet (RJ45) ports supporting PROFINET, four USB ports, and additional interfaces depending on the configuration, enabling integration into industrial networks.

What is the supply voltage for the SIMATIC IPC277D?

The panel PC operates on a 24 V DC supply voltage, which is standard for Siemens industrial panel PCs and compatible with typical control cabinet power supplies.

Troubleshooting

Display remains blank after power on

Check the 24 V DC supply voltage at the power connector and verify the power LED status. Measure the supply current to confirm it meets the unit's power requirements.

Ensure the power supply provides stable 24 V DC with sufficient current capacity (at least 3 A). If the supply is correct and the display remains blank, the internal power board or backlight inverter may have failed and the unit should be sent for repair.

Touch input is unresponsive or inaccurate

Inspect the touch screen surface for contamination, damage, or moisture. Check if the issue occurs across the entire screen or only in specific zones.

Clean the screen surface with a dry lint-free cloth. If the issue persists, recalibrate the touch screen through the Windows control panel. A hardware fault in the PCT touch controller may require replacement of the touch assembly.

Panel PC fails to boot or shows 'No Boot Device' error

Check whether the Compact Flash card or SSD is properly seated in its slot. Listen for unusual sounds and check BIOS boot order settings.

Reseat the storage medium firmly. If the device is still not detected, test it in another compatible system. If the storage medium has failed, replace it and restore the system image from a backup.

Ethernet communication is not established

Verify the Ethernet cable connection and check the link LEDs on the RJ45 ports. Confirm the IP address configuration in Windows Network Settings and check for PROFINET configuration conflicts.

Replace the Ethernet cable and test with a known-good network switch port. Reconfigure the IP address settings if necessary. If both Ethernet ports fail, the network interface hardware may be faulty and require service.

System overheats and shuts down unexpectedly

Check the ambient temperature around the panel and verify that ventilation clearances are maintained. Inspect the rear of the unit for blocked ventilation slots or a failed cooling fan if applicable.

Ensure the operating environment does not exceed 50 °C and that the panel has adequate clearance for airflow. Clean any dust from ventilation openings. If a cooling fan is present and has failed, replace it. Consider adding external cooling to the enclosure if ambient temperatures are high.

Condition	Repair, Used, Refurbished, New in box (sealed)