• In-house repair workshop   ·   Emergency repairs   ·   New & used delivery   ·   Search & Rescue for end-of-life electronics
  • +31 513 201 218
    logo-smalllogo-smalllogo-smalllogo-small
    English
    • Dutch
    • German
    EMERGENCY REPAIR
    • Home
    • Products
      • Drive
      • HMI & Display
      • PLC
      • Power supply
      • Servo Motor
      • Products
    • Repair
      • Drives repair
        • Danfoss drives repair
        • Lenze drives repair
        • Schneider Eletric Altivar drives repair
        • Siemens Sinamics repair
      • HMI repair
        • Omron HMI repair
        • Siemens HMI repair
      • Custom repair
      • PCB repair
      • PLC-repair
      • Marine & offshore
    • Emergency repair
    • Search and Rescue
    • About us
      • Why Cirele
    • All brands
      • Allen-Bradley
      • Baumuller
      • Danfoss
      • Lenze
      • Omron
      • Schneider Electric
      • Siemens
      • Brands
    • News
    • Contact
    ✕
    • Home
    • HMI & Display
    • Siemens 6AV6642-0BC01-1AX0 TP177B
    Siemens 6AV6642-0BC01-1AX0 TP177B

    Siemens 6AV6642-0BC01-1AX0 TP177B

    € 630,00 – € 1.421,00Price range: € 630,00 through € 1.421,00

    Reset
    Clear
    SKU: 6AV6642-0BC01-1AX0 Category: HMI & Display Brand: Siemens
    • Description
    • Additional information

    The Siemens 6AV6642-0BC01-1AX0 is a TP177B series touch panel HMI belonging to the SIMATIC HMI family, manufactured by Siemens. It features a 5.7-inch STN color display and is designed for machine-level operator control and monitoring tasks. This unit is part of the SIMATIC HMI Basic Panels generation, offering a compact and cost-effective solution for visualizing process data.

    The TP177B 6AV6642-0BC01-1AX0 is equipped with a resistive touch screen and supports communication via MPI, PROFIBUS DP, and RS-422/RS-485 interfaces, enabling direct connection to SIMATIC S7 PLCs and third-party controllers. It provides 256-color display capability and includes 512 KB of user memory for project data. The panel operates on a 24 V DC supply and is rated IP65 on the front face, making it suitable for installation in control cabinet doors exposed to dust and splash water.

    The TP177B is widely deployed in manufacturing, packaging, food and beverage, and general machine automation applications where a reliable, mid-range HMI is required. Its compatibility with SIMATIC S7-200, S7-300, and S7-400 PLCs makes it a standard choice for machine builders integrating Siemens automation architectures. The panel is configured using WinCC flexible 2008 engineering software, which is common across the SIMATIC HMI product range.

    Technical Specifications

    Display Size 5.7 inch
    Display Type STN color LCD
    Display Colors 256 colors
    Display Resolution 320 x 240 px (QVGA)
    Touch Technology Resistive touch screen
    Input/Operating Voltage 24 V DC
    Power Consumption Max. 6 W
    Communication Interface MPI, PROFIBUS DP, RS-422/RS-485
    User Memory 512 KB
    Operating Temperature 0 °C to +50 °C
    Storage Temperature -20 °C to +60 °C
    IP Rating (Front) IP65
    IP Rating (Rear) IP20
    Mounting Panel mounting
    Certifications CE, UL, cULus
    Engineering Software WinCC flexible 2008

    Common Error Codes & System Events

    Event ID: 10000
    Configuration error detected during startup; the loaded project is incompatible or corrupt.
    Reload the project using WinCC flexible 2008. Verify the project was compiled for the correct HMI device type and firmware version.
    Event ID: 20000
    Communication connection to the PLC has been lost or cannot be established.
    Check MPI/PROFIBUS cable connections and termination resistors. Verify the PLC address and baud rate settings match the HMI project configuration.
    Event ID: 40000
    Tag read/write error; a configured tag cannot be accessed on the connected controller.
    Verify the tag address in the WinCC flexible project matches the actual PLC data block or memory address. Check PLC program is running.
    Event ID: 50000
    System memory low; available runtime memory is insufficient for the current project.
    Reduce the number of active screens, alarms, or data records in the project. Transfer an optimized project to the panel.
    Event ID: 60000
    Backup/restore error; a data backup or project restore operation has failed.
    Check the integrity of the source file on the memory card. Reformat the memory card if necessary and retry the transfer.
    Event ID: 70000
    Operating system error; an internal firmware fault has been detected.
    Perform a factory reset via the Control Panel in the HMI loader menu. If the fault persists, update or reinstall the firmware using ProSave.
    Event ID: 80000
    Screen saver or display fault; display output has become unresponsive or blank.
    Check the 24 V DC power supply voltage at the connector. Verify the screen saver settings in the project. Replace the panel if the display hardware is faulty.

    Frequently Asked Questions

    Which PLCs are compatible with the TP177B 6AV6642-0BC01-1AX0?

    The TP177B is compatible with SIMATIC S7-200, S7-300, and S7-400 PLCs via MPI or PROFIBUS DP. It also supports communication with third-party controllers via the RS-422/RS-485 serial interface.

    What software is required to program and configure this HMI panel?

    The TP177B is configured using Siemens WinCC flexible 2008 engineering software. Projects must be compiled specifically for the TP177B device type before transfer.

    How is the project transferred to the TP177B panel?

    Projects can be transferred via the MPI/PROFIBUS interface using a PC adapter cable, or via a compatible MMC/SD memory card. The ProSave tool can also be used for firmware updates and data backup.

    What is the IP protection rating of this panel?

    The front face of the TP177B is rated IP65, providing protection against dust ingress and low-pressure water jets. The rear of the unit is rated IP20.

    What is the supply voltage for the TP177B?

    The TP177B operates on a 24 V DC supply voltage. The permissible voltage range is typically 19.2 V DC to 28.8 V DC.

    Troubleshooting

    Display remains blank after power on

    Measure the 24 V DC supply voltage at the power connector on the rear of the panel. Check that the voltage is within the 19.2–28.8 V DC range. Inspect the internal fuse if accessible.

    Correct the power supply voltage if out of range. If the supply is correct and the display remains blank, the backlight or internal power board may be faulty and the panel should be sent for repair or replacement.

    Touch screen does not respond or registers incorrect touch positions

    Perform a touch screen calibration from the HMI Control Panel accessible via the loader menu. Check for physical damage or contamination on the touch surface.

    Recalibrate the touch screen using the calibration utility in the Control Panel. Clean the screen surface with a soft cloth. If calibration does not resolve the issue, the touch overlay may require replacement.

    HMI cannot establish communication with the PLC

    Verify the MPI or PROFIBUS DP cable connections and check that bus termination resistors are correctly installed at both ends of the network. Confirm the PLC address and baud rate in the HMI project match the physical network settings.

    Correct any wiring faults and ensure proper bus termination. Update the communication parameters in the WinCC flexible project and retransfer to the panel. Test with a known-good cable if the issue persists.

    Panel continuously reboots or freezes during operation

    Check the 24 V DC supply for voltage dips or ripple using an oscilloscope or multimeter. Inspect the project for memory overload or corrupted screen configurations.

    Stabilize the power supply by using a dedicated 24 V DC source with adequate current capacity. Reload the project from WinCC flexible 2008. If the problem continues, perform a factory reset and reinstall the firmware using ProSave.

    Project transfer fails or panel does not enter transfer mode

    Confirm the panel is set to allow transfer in the loader menu settings. Check the MPI/PROFIBUS cable and PC adapter for correct driver installation on the engineering PC.

    Set the transfer mode to enabled in the HMI Control Panel. Reinstall the PC adapter drivers and verify the correct COM port or USB adapter is selected in WinCC flexible. Alternatively, use a memory card to perform the project transfer.

    Condition

    Repair, Used, Refurbished, New in box (sealed)

    Related products

    • Siemens 6AG1643-0AA01-4AX0 MP 277

      Siemens 6AG1643-0AA01-4AX0 MP 277

      € 1.278,00
      Select options This product has multiple variants. The options may be chosen on the product page
    • Siemens 6AG1545-0BC15-2AX0 SIPLUS HMI TP900

      Siemens 6AG1545-0BC15-2AX0 SIPLUS HMI TP900

      € 875,00
      Select options This product has multiple variants. The options may be chosen on the product page
    • Siemens 6AG1642-0BD01-4AX0 TP177B

      Siemens 6AG1642-0BD01-4AX0 TP177B

      € 555,00
      Select options This product has multiple variants. The options may be chosen on the product page

    Contact

    +31 513 201 218
    [email protected]

    CoC: 90417704
    VAT: NL865308317B01

    Location

    CirEle BV
    Röntgenweg 1
    8503 AG Joure
    The Netherlands

    General

    About us
    Shipping
    Terms and conditions
    Privacy policy
    Contact

    Repair

    Omron HMI repair
    Siemens HMI repair
    PLC repair
    Drives repair
    Request repair

    CirEle BV © 2026 | Terms and conditions | Privacy policy | Proudly powered by BOWI Marketing
      EMERGENCY REPAIR
      0

      € 0,00

      English
      • Dutch
      • English
      • German
        ✕

        Login

        Lost your password?

        Create an account?

        ✕

        Cart

        Proceed to checkout View cart
        • Shop
        • My account
        • 0 Cart