Siemens 6AV7611-0AB20-0CH0 SIMATIC Panel PC 670

Name: Siemens 6AV7611-0AB20-0CH0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7611-0AB20-0CH0
Price: 1770.00 EUR
Availability: InStock

€ 1.770,00

Condition

Clear

SKU: 6AV7611-0AB20-0CH0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7611-0AB20-0CH0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted PC designed for demanding human-machine interface (HMI) and visualization tasks in automation environments. This unit combines a built-in display with a full PC architecture, enabling it to run standard Windows-based SCADA and HMI software alongside process control applications.

The SIMATIC Panel PC 670 features a 12-inch TFT display with a resolution of 800 x 600 pixels and a touch-sensitive front panel for operator interaction. It is built around an industrial-grade processor platform and supports communication via standard interfaces including Ethernet, USB, and serial ports, allowing integration with a wide range of automation systems and PLCs. The unit is designed for front-panel mounting with an IP65-rated front face, providing protection against dust and water ingress in industrial environments, and operates on a 24 V DC supply.

The SIMATIC Panel PC 670 is widely used in manufacturing, process automation, and machine tool industries where a robust, panel-integrated PC solution is required. Its compatibility with Siemens WinCC and other SCADA software makes it suitable for visualization, data logging, and process monitoring tasks. The rugged construction and industrial-grade components make it appropriate for continuous operation in factory floor environments with elevated temperatures, vibration, and electromagnetic interference.

Technical Specifications

Series	SIMATIC Panel PC 670
Display Size	12 inch
Display Type	TFT LCD
Display Resolution	800 x 600 pixels (SVGA)
Touch Technology	Resistive touchscreen
Input Voltage	24 V DC
Front Protection Rating	IP65
Rear Protection Rating	IP20
Operating Temperature	0 °C to +45 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5 % to 95 % (non-condensing)
Communication Interfaces	Ethernet (RJ45), USB, Serial (RS-232)
Mounting	Panel mounting (front-panel flush mount)
Certifications	CE, UL

Common Error Codes & System Events

Event ID: 100: Operating system startup error or boot failure detected during POST sequence.
Check hard disk or CompactFlash integrity. Verify BIOS settings and re-seat memory modules. Replace storage media if corrupted.
Event ID: 200: Watchdog timeout triggered, indicating the application or OS has become unresponsive.
Restart the Panel PC. Check for software loops or resource overloads in the HMI application. Update or reinstall the HMI runtime software.
Event ID: 300: Fan failure or thermal warning detected; internal temperature exceeding threshold.
Inspect and clean cooling fan and ventilation slots. Ensure ambient temperature is within specification. Replace fan unit if faulty.
Event ID: 400: Ethernet communication link lost or network interface not detected.
Check Ethernet cable connection and network switch. Verify IP configuration settings in the operating system. Replace cable or network adapter if hardware fault is confirmed.
Event ID: 500: Touchscreen calibration error or touch input not responding correctly.
Recalibrate the touchscreen via the Windows control panel or SIMATIC configuration tool. Clean the touch surface. Replace touchscreen controller if recalibration fails.
Event ID: 600: Power supply undervoltage detected; supply voltage below operational threshold.
Measure the 24 V DC supply at the power connector. Ensure the power supply unit can deliver sufficient current. Replace or adjust the power supply as needed.
Event ID: 700: Storage device read/write error on hard disk or CompactFlash card.
Run a disk diagnostic utility. Back up data and replace the storage medium. Restore the operating system and HMI application from backup media.

Frequently Asked Questions

What operating system does the SIMATIC Panel PC 670 (6AV7611-0AB20-0CH0) run?

The SIMATIC Panel PC 670 is typically supplied with Windows XP Embedded or Windows 2000, depending on the variant ordered. This unit (6AV7611-0AB20-0CH0) is configured for Windows XP Embedded.

What is the display size and resolution of this Panel PC?

The 6AV7611-0AB20-0CH0 features a 12-inch TFT display with a resolution of 800 x 600 pixels (SVGA).

What is the supply voltage for this unit?

The Panel PC 670 operates on a 24 V DC supply voltage, which is standard for Siemens industrial panel devices.

Is this Panel PC compatible with Siemens WinCC?

Yes, the SIMATIC Panel PC 670 is compatible with Siemens WinCC and WinCC flexible SCADA and HMI software, as it runs a full Windows-based PC environment.

What is the front panel protection rating of the 6AV7611-0AB20-0CH0?

The front panel of the 6AV7611-0AB20-0CH0 is rated IP65, providing protection against dust and low-pressure water jets, making it suitable for industrial panel mounting.

Troubleshooting

Display remains blank after power is applied

Check the 24 V DC supply voltage at the power connector using a multimeter. Verify that the internal fuse is intact and that the backlight inverter is functioning.

Restore the 24 V DC supply to within specification. Replace the internal fuse if blown. If the backlight has failed, replace the backlight inverter or the display assembly.

Touchscreen does not respond or registers incorrect touch positions

Attempt touchscreen recalibration via the Windows control panel. Inspect the touch surface for contamination or physical damage.

Recalibrate the touchscreen using the SIMATIC or Windows calibration utility. Clean the screen surface with a soft cloth. If the issue persists, replace the touchscreen controller or overlay.

Panel PC fails to boot or continuously restarts

Connect an external monitor and keyboard to observe POST messages. Check the hard disk or CompactFlash card for errors using a diagnostic tool.

Replace the storage medium and reinstall the operating system and HMI application from a backup image. Verify BIOS settings are correct after replacement.

Ethernet communication is not established with the PLC or network

Check the Ethernet cable and verify the link LED on the RJ45 port is active. Confirm IP address configuration in the operating system network settings.

Replace the Ethernet cable if damaged. Reconfigure the IP address and subnet mask to match the network. Update the network adapter driver if the interface is not detected.

Unit overheats and shuts down unexpectedly

Check the ambient temperature around the panel installation. Inspect the cooling fan for operation and verify that ventilation slots are not blocked.

Ensure the installation environment is within the 0 to 45 degrees C operating range. Clean ventilation slots and replace the cooling fan if it is not operating. Provide additional panel ventilation if required.

Condition	Repair, Used, Refurbished, New in box (sealed)