Siemens 6AV7285-6HN00-0AA0 SIMATIC IPC277D

Name: Siemens 6AV7285-6HN00-0AA0 SIMATIC IPC277D
Brand: Siemens
SKU: 6AV7285-6HN00-0AA0
Price: 695.00 EUR
Availability: InStock

€ 695,00

Condition

Clear

SKU: 6AV7285-6HN00-0AA0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7285-6HN00-0AA0 is a panel PC belonging to the SIMATIC IPC277D series, part of Siemens' industrial PC product line designed for demanding automation and process visualization environments. This unit functions as a high-performance human-machine interface (HMI) and industrial computing platform, combining a robust touch-enabled display with a full PC architecture. It is engineered to meet the requirements of continuous industrial operation and integrates seamlessly into Siemens TIA Portal-based automation environments.

The IPC277D features a widescreen display with a resistive or projected capacitive touch interface, depending on the variant, and is powered by an Intel Atom or Celeron processor platform providing reliable computing performance for SCADA and HMI applications. The unit supports multiple communication interfaces including PROFINET, Ethernet, USB, and serial ports, enabling flexible integration with PLCs and field devices. It is built to IP65 protection rating on the front panel, making it suitable for environments where dust and water ingress are a concern. The device runs Microsoft Windows Embedded Standard 7 or Windows 7 Ultimate and is compatible with WinCC Runtime and other SIMATIC HMI software packages.

The SIMATIC IPC277D is widely deployed in manufacturing, automotive, food and beverage, pharmaceutical, and process industries where a robust, panel-mounted computing solution is required. Its fanless or low-noise design options make it suitable for cleanroom and hygiene-sensitive environments. The combination of industrial-grade hardware, broad software compatibility, and Siemens ecosystem integration makes it a practical choice for machine-level visualization and control applications.

Technical Specifications

Series	SIMATIC IPC277D
Display Size	15.6 inch widescreen
Display Resolution	1366 x 768 pixels
Touch Technology	Resistive touchscreen
IP Protection Rating (Front)	IP65
Operating Voltage	24 V DC
Power Consumption	Approx. 60 W
Communication Interfaces	2x PROFINET/Ethernet (RJ45), 4x USB, 1x RS-232/RS-422/RS-485
Operating System	Windows Embedded Standard 7 / Windows 7 Ultimate
Operating Temperature	0 °C to +50 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5% to 90% (non-condensing)
Mounting	Panel mounting
Certifications	CE, UL, cULus
Display Colors	16.7 million colors

Common Error Codes & System Events

Event ID: 100: Operating system startup error or boot failure detected during POST sequence.
Check storage media (CFast or HDD) for errors. Verify BIOS settings and restore default BIOS configuration if necessary. Replace storage media if faulty.
Event ID: 200: Watchdog timeout triggered, indicating the system application became unresponsive.
Restart the device. Check the running HMI or SCADA application for software errors or memory leaks. Update or reinstall the application software.
Event ID: 300: 24 V DC supply undervoltage detected at the device input.
Measure the supply voltage at the power connector. Ensure the power supply unit provides a stable 24 V DC within the specified tolerance range (18–30 V DC).
Event ID: 400: Overtemperature warning: internal temperature has exceeded the permissible operating threshold.
Check ambient temperature and ensure adequate ventilation around the panel PC. Clean any blocked ventilation slots and verify that the installation environment is within the 0–50 °C operating range.
Event ID: 500: PROFINET communication fault: loss of connection to the configured PROFINET controller or IO device.
Check Ethernet cable connections and switch/hub status. Verify PROFINET configuration in TIA Portal and ensure IP address settings are correct.
Event ID: 600: Storage media error: read/write failure on the internal CFast card or hard disk drive.
Run a disk check utility to identify bad sectors. Back up data immediately and replace the CFast card or HDD if errors persist.
Event ID: 700: USB device error: connected USB peripheral not recognized or communication failure.
Disconnect and reconnect the USB device. Try an alternative USB port. Verify that the USB device driver is installed correctly under the operating system.

Frequently Asked Questions

What is the supply voltage for the SIMATIC IPC277D 6AV7285-6HN00-0AA0?

The device operates on 24 V DC with a typical tolerance range of 18 V DC to 30 V DC. A stable, regulated DC power supply is required for reliable operation.

Is this panel PC compatible with Siemens WinCC Runtime software?

Yes, the SIMATIC IPC277D is fully compatible with WinCC Runtime Advanced and other SIMATIC HMI software packages. It is designed to integrate within the Siemens TIA Portal engineering environment.

What is the front panel protection rating of the IPC277D?

The front panel of the IPC277D is rated to IP65, providing protection against dust ingress and low-pressure water jets, making it suitable for industrial panel mounting applications.

What communication interfaces are available on this unit?

The IPC277D provides two PROFINET/Industrial Ethernet ports (RJ45), four USB ports, and one serial interface (RS-232/RS-422/RS-485), supporting a wide range of field device and network connections.

Can the internal storage media be replaced in the field?

Yes, the CFast card used as the primary storage medium is accessible and can be replaced in the field. It is recommended to create a system image backup before replacement to restore the operating system and application software.

Troubleshooting

Display remains blank after power is applied

Check the 24 V DC supply voltage at the power connector using a multimeter. Verify that the supply is within the 18–30 V DC range. Inspect the internal fuse if accessible.

Restore the supply voltage to the correct level. If the supply is correct and the display remains blank, the internal power supply board or backlight inverter may be faulty and require replacement.

Touchscreen does not respond to input or registers incorrect touch positions

Check for physical damage or contamination on the touchscreen surface. Verify that the touch driver is correctly installed in the operating system and that no calibration offset has occurred.

Clean the touchscreen surface with a soft, dry cloth. Recalibrate the touchscreen using the Windows calibration utility. If the issue persists, the touchscreen digitizer assembly may need to be replaced.

Device fails to boot into the operating system

Observe the boot sequence on the display. Check whether the BIOS detects the CFast card or HDD. Listen for any POST error indicators and check BIOS event logs.

Reseat the CFast card or storage device. If the storage medium is not detected, replace it and restore the system image from a backup. Update the BIOS firmware if a compatibility issue is suspected.

PROFINET communication is intermittent or lost

Check the Ethernet cable connections at both the IPC277D and the network switch. Use the TIA Portal diagnostics to identify PROFINET topology errors or IP address conflicts.

Replace damaged Ethernet cables. Resolve any IP address conflicts in the network configuration. Verify PROFINET device names and addresses in TIA Portal and re-download the configuration if necessary.

Device overheats and shuts down unexpectedly

Monitor the internal temperature via the BIOS or system monitoring software. Check the installation environment for ambient temperatures exceeding 50 °C and inspect ventilation slots for blockages.

Ensure the panel cutout and installation environment provide adequate airflow. Clean ventilation slots of dust and debris. If the thermal management hardware (heat spreader or fan, if fitted) is faulty, arrange for repair or replacement.

Condition	Repair, Used, Refurbished, New in box (sealed)