Siemens 6AV6371-1KG07-5AX3 WinCC flexible 2007

Common Error Codes & System Events

Event ID: 1000

Runtime startup error — WinCC flexible Runtime failed to initialize correctly on the target device.
Check that the correct Runtime version is installed on the target panel or PC. Verify license availability and re-transfer the project.

Event ID: 2501

Communication error — No connection established to the configured PLC or controller.
Verify network cabling and communication settings (IP address, MPI address, PROFIBUS address). Check that the PLC is powered and in RUN mode.

Event ID: 3000

Tag read/write error — A configured tag could not be read from or written to the controller.
Check the tag address configuration in the WinCC flexible project. Verify the corresponding data block or memory area exists in the PLC program.

Event ID: 4010

License not found — No valid license detected for WinCC flexible Engineering or Runtime.
Install the correct license using the Siemens Automation License Manager (ALM). Ensure the license matches the software version and edition.

Event ID: 5100

Project transfer error — Project could not be transferred to the target HMI panel.
Check the transfer connection (USB, Ethernet, or MPI). Ensure the panel is in Transfer mode and that the correct communication channel is selected in the transfer settings.

Event ID: 6200

Alarm buffer overflow — The alarm buffer on the HMI device has reached its maximum capacity.
Acknowledge and clear pending alarms. Review alarm configuration to reduce unnecessary alarm generation or increase the alarm buffer size in the project settings.

Event ID: 7300

Recipe data error — Recipe records could not be read or written correctly.
Verify the recipe configuration and associated tag addresses. Check available storage memory on the target device and ensure the recipe data format matches the project definition.