Siemens 6ES7621-6BD01-0AE3 SIMATIC C7-621
€ 799,00 – € 966,00Price range: € 799,00 through € 966,00
The Siemens SIMATIC C7-621, part number 6ES7621-6BD01-0AE3, is a compact combined controller and operator panel unit belonging to the SIMATIC C7 product family. It integrates a SIMATIC S7-300 compatible CPU with an operator panel interface into a single housing, eliminating the need for separate PLC and HMI components. This all-in-one design is part of Siemens' strategy to provide space-saving automation solutions for machine-level control.
The C7-621 features an integrated operator panel with a monochrome display and touch or membrane keypad interface, supporting direct configuration via STEP 7 and ProTool engineering software. It includes onboard digital I/O points, MPI (Multi-Point Interface) communication for integration into SIMATIC networks, and supports standard S7-300 instruction sets. The unit provides integrated data and program memory sufficient for typical machine-level applications, and the CPU is compatible with standard S7-300 programming tools and libraries.
The SIMATIC C7-621 is primarily deployed in standalone machine automation tasks such as packaging machinery, printing equipment, textile machines, and small-scale process control panels. Its compact integrated design makes it well suited for applications where panel space is limited and a dedicated HMI-PLC combination would otherwise require additional cabinet space. The unit is commonly found in OEM machine building environments where a cost-effective and space-efficient control solution is required.
Technical Specifications
| Series/Product Family | SIMATIC C7 |
|---|---|
| Integrated CPU | S7-300 compatible |
| Display Type | Monochrome LCD |
| Communication Interface | MPI (Multi-Point Interface) |
| Onboard Digital Inputs | 16 |
| Onboard Digital Outputs | 16 |
| Input/Operating Voltage | 24 V DC |
| Operating Temperature | 0 °C to +55 °C |
| Storage Temperature | -20 °C to +70 °C |
| Relative Humidity | 10 % to 95 % (non-condensing) |
| Mounting | Panel mounting |
| Engineering Software | STEP 7, ProTool |
| Certifications | CE, UL |
Common System Event Codes
- Event ID: 10000
- General CPU stop — the integrated CPU has transitioned to STOP state due to a programming or configuration error.
Check the diagnostic buffer in STEP 7 (SIMATIC Manager) for the specific cause. Correct the program or configuration and perform a CPU restart. - Event ID: 10006
- Cycle time exceeded — the OB1 scan cycle time has exceeded the configured maximum watchdog time.
Optimize the user program to reduce cycle time, or increase the maximum cycle time setting in the CPU properties via STEP 7. - Event ID: 10010
- I/O access error — the CPU attempted to access a peripheral I/O address that is not configured or not responding.
Verify the hardware configuration in STEP 7 matches the physical I/O. Check wiring and module status. Update and download the hardware configuration. - Event ID: 10020
- Battery/backup voltage low — the backup battery or capacitor maintaining retentive memory is low or exhausted.
Replace the backup battery if fitted. Acknowledge the alarm and perform a memory reset if retentive data is corrupted. - Event ID: 10050
- MPI communication fault — loss of communication on the MPI network, possibly due to incorrect baud rate, address conflict, or cable fault.
Check MPI cable connections and termination resistors. Verify that all nodes have unique MPI addresses and matching baud rate settings. - Event ID: 10100
- Configuration mismatch — the loaded hardware configuration does not match the actual hardware detected at startup.
Open the hardware configuration in STEP 7, correct the configuration to match the installed hardware, and download the updated configuration to the C7 unit. - Event ID: 10200
- Operator panel communication error — the integrated HMI panel has lost communication with the internal CPU.
Perform a complete power cycle of the C7 unit. If the fault persists, check internal connections and consider unit replacement or repair.
Frequently Asked Questions
Is the SIMATIC C7-621 programmed using standard STEP 7 software?
Yes, the integrated CPU of the C7-621 is programmed using Siemens STEP 7 (SIMATIC Manager). The operator panel portion is configured using ProTool engineering software.
What communication interface does the C7-621 support?
The C7-621 supports MPI (Multi-Point Interface), which allows it to be connected to other SIMATIC S7 controllers, programming devices, and HMI devices within a SIMATIC network.
Can the C7-621 be expanded with additional S7-300 I/O modules?
The C7-621 is compatible with the S7-300 I/O expansion system, allowing additional signal modules to be connected via the backplane bus to extend the number of I/O points.
What is the supply voltage for the C7-621?
The C7-621 operates on a 24 V DC supply voltage, which is standard for SIMATIC C7 series units.
What software is required to configure the HMI portion of the C7-621?
The operator panel interface of the C7-621 is configured using Siemens ProTool software, which generates the screen layouts, tags, and alarm configurations for the integrated display.
Troubleshooting
CPU remains in STOP mode after power on
Check the diagnostic buffer using STEP 7 online diagnostics. Look for event IDs indicating program errors, configuration mismatches, or I/O faults. Verify that the mode selector switch is set to RUN.
Correct any identified program or configuration errors in STEP 7, download the corrected project to the unit, and switch the CPU to RUN mode. If a memory reset is required, perform a MRES procedure using the mode selector.
Operator panel display is blank or shows no image after power on
Measure the 24 V DC supply voltage at the power input terminals. Check for blown internal fuses. Verify that the unit is fully powered and the CPU is not in a fault state that suppresses the display.
Restore correct 24 V DC supply if missing. Replace any blown fuses with the correct rating. If the display hardware is faulty, the unit will require repair or replacement of the display assembly.
MPI communication cannot be established with programming device
Verify the MPI address of the C7-621 in the hardware configuration. Check that the PC adapter or MPI cable is correctly connected and that bus termination is applied at both ends of the MPI segment.
Correct the MPI address if there is a conflict, ensure termination resistors are active at both cable ends, and confirm the baud rate on the programming device matches the network setting (typically 187.5 kbps).
I/O signals not responding correctly
Check the hardware configuration in STEP 7 to confirm the I/O addresses match the physical wiring. Use the variable monitor table in STEP 7 to observe the actual signal states online.
Correct any address mismatches in the hardware configuration and download the updated configuration. Check field wiring for open circuits or short circuits. Verify that the 24 V DC load voltage supply for outputs is present.
Retentive data lost after power cycle
Check the backup battery status in the diagnostic buffer. If no battery is fitted or the battery is exhausted, retentive memory will not be maintained during power loss.
Install or replace the backup battery with the correct Siemens-specified type. After replacement, acknowledge the battery alarm and verify that retentive data areas are correctly initialized in the user program.
| Condition | Repair, Used, Refurbished, New in box (sealed) |
|---|
Related products
-
Siemens 6AV6642-8BA12-0AB0 TP177B
€ 879,00Select options This product has multiple variants. The options may be chosen on the product page -
Siemens 6AV6640-0CA01-0AX0 OP 73micro
€ 279,00 – € 444,13Price range: € 279,00 through € 444,13Select options This product has multiple variants. The options may be chosen on the product page -
Siemens 6AV6642-0BC01-1AX0 TP177B
€ 630,00 – € 1.421,00Price range: € 630,00 through € 1.421,00Select options This product has multiple variants. The options may be chosen on the product page




