Siemens 6AV7612-0AE12-0CG0 SIMATIC Panel PC 670

Name: Siemens 6AV7612-0AE12-0CG0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7612-0AE12-0CG0
Price: 2007.00 EUR
Availability: InStock

€ 2.007,00

Condition

Clear

SKU: 6AV7612-0AE12-0CG0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7612-0AE12-0CG0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel PC designed for demanding human-machine interface applications, combining a built-in display with a full PC architecture running a Windows-based operating system. This unit is intended for use as a high-performance operator station in industrial automation environments.

The SIMATIC Panel PC 670 features a 12-inch TFT display with a resolution of 800 x 600 pixels (SVGA) and is equipped with a touch screen interface for operator interaction. It is built around an industrial-grade processor with onboard RAM and flash memory, and supports standard PC interfaces including USB, Ethernet, and serial communication ports. The unit is designed for panel mounting and offers a fanless or low-maintenance design suited to continuous industrial operation, with an IP65 protection rating on the front panel.

The Panel PC 670 is widely used in manufacturing, process automation, and machine tool industries where a full PC-based HMI solution is required. Its compatibility with Siemens SIMATIC WinCC and other SCADA software makes it suitable for visualization, data logging, and process control tasks. The robust industrial housing and wide operating temperature range make it appropriate for installation in control cabinets and operator panels in factory floor environments.

Technical Specifications

Display Size	12 inch
Display Resolution	800 x 600 pixels (SVGA)
Display Type	TFT color LCD
Touch Technology	Resistive touchscreen
Input Voltage	24 V DC
IP Protection Rating (Front)	IP65
Operating Temperature	0 °C to +50 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5% to 90% (non-condensing)
Communication Interface	Ethernet (RJ45), USB, RS-232
Mounting	Panel mounting
Operating System	Windows XP Embedded
Series/Product Family	SIMATIC Panel PC 670
Certifications	CE, UL

Common Error Codes & System Events

Event ID: 100: System startup error — the operating system failed to load correctly during boot sequence.
Check the CompactFlash card or hard disk for integrity. Reimage the storage medium with the correct OS image if necessary.
Event ID: 1000: Application fault — a software application such as WinCC has crashed or become unresponsive.
Restart the application. Check the Windows event log for details. Reinstall the HMI software if the fault recurs.
Event ID: 26: Hardware configuration mismatch — installed hardware does not match the expected system configuration.
Verify hardware components and update the BIOS or system configuration accordingly.
Communication Error: Loss of communication between the Panel PC and the connected PLC or automation system.
Check Ethernet or serial cable connections. Verify IP address settings and communication driver configuration in WinCC or the HMI project.
Watchdog Timeout: The system watchdog has triggered due to the operating system or application becoming unresponsive.
Perform a controlled restart. Investigate CPU load and running processes. Check for software conflicts or memory leaks.
Temperature Warning: Internal temperature of the Panel PC has exceeded the recommended operating threshold.
Check ambient temperature and ventilation around the unit. Clean air vents and ensure the panel cutout provides adequate clearance. Verify the cooling fan if fitted.
Storage Medium Error: Read/write error detected on the CompactFlash card or internal hard disk.
Back up project data immediately. Replace the CompactFlash card or hard disk and restore the OS image and HMI project.

Frequently Asked Questions

What is the supply voltage for the 6AV7612-0AE12-0CG0?

The unit operates on a 24 V DC supply voltage, which is standard for SIMATIC Panel PC 670 devices.

What operating system does this Panel PC run?

The SIMATIC Panel PC 670 (6AV7612-0AE12-0CG0) runs Windows XP Embedded, which is pre-installed on the storage medium.

Is this Panel PC compatible with Siemens WinCC?

Yes, the Panel PC 670 is fully compatible with Siemens SIMATIC WinCC and WinCC flexible visualization software, making it suitable for SCADA and HMI applications.

What is the front panel protection rating of this unit?

The front panel of the 6AV7612-0AE12-0CG0 carries an IP65 protection rating, making it resistant to dust and water jets.

What communication interfaces are available on this Panel PC?

The unit provides Ethernet (RJ45), USB ports, and RS-232 serial interfaces for connectivity to PLCs, networks, and peripheral devices.

Troubleshooting

Display remains blank after power on

Check the 24 V DC supply voltage at the power connector. Verify that the power LED indicator is active. Measure voltage at the internal power supply output.

Ensure the 24 V DC supply is within tolerance. If the supply is correct but the display remains blank, the internal power supply board or the TFT display panel may require replacement.

Touchscreen does not respond to input

Check if the operating system has loaded correctly. Verify that the touch controller driver is active in Windows Device Manager. Test with a USB mouse to confirm the OS is responsive.

Recalibrate the touchscreen using the Windows calibration utility. If the issue persists, check the internal ribbon cable connection to the touch panel or replace the touchscreen overlay.

Panel PC fails to boot or gets stuck at startup

Attempt to boot into Windows safe mode. Check the CompactFlash card or hard disk for errors using diagnostic tools. Review BIOS settings for correct boot device order.

Reimage the CompactFlash card or replace it with a new card loaded with the correct OS image and HMI project. Restore the BIOS to default settings if misconfiguration is suspected.

Loss of communication with PLC

Verify the Ethernet cable connection and check the network configuration in Windows. Confirm the IP address of the Panel PC matches the project configuration. Check the PLC communication settings.

Correct any IP address conflicts or subnet mismatches. Restart the WinCC communication driver. Replace the Ethernet cable if a physical fault is suspected.

System runs slowly or application freezes

Check CPU and memory utilization in Windows Task Manager. Identify any background processes consuming excessive resources. Check available storage space on the system drive.

Close unnecessary background applications. Free up storage space on the CompactFlash card or hard disk. If the issue persists, consider reimaging the system with a clean OS and HMI project installation.

Condition	Repair, Used, Refurbished, New in box (sealed)