Siemens 6AV7612-0AB20-0CE0 SIMATIC Panel PC 670

Name: Siemens 6AV7612-0AB20-0CE0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7612-0AB20-0CE0
Price: 2007.00 EUR
Availability: InStock

€ 2.007,00

Condition

Clear

SKU: 6AV7612-0AB20-0CE0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7612-0AB20-0CE0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted PC designed for demanding human-machine interface (HMI) and visualization tasks in industrial automation environments. This unit combines a flat-panel display with an integrated PC platform, offering a compact and rugged all-in-one solution for process visualization and control.

The SIMATIC Panel PC 670 features a 12-inch TFT color display with a resolution of 800 x 600 pixels (SVGA) and supports touch screen operation. It is built around an x86-compatible processor architecture and runs Microsoft Windows operating systems, enabling compatibility with standard SCADA and HMI software including Siemens WinCC. The unit provides communication interfaces including Ethernet (RJ45) and serial ports, and is designed for front-panel mounting with an IP65 protection rating on the front face, making it suitable for use in environments where dust and water ingress are concerns.

The SIMATIC Panel PC 670 is widely used in manufacturing, process industries, automotive production, and machine building applications where a full PC-based HMI platform is required. Its ability to run standard Windows-based software makes it suitable for complex visualization tasks, data logging, and integration with higher-level MES or SCADA systems. The rugged industrial design and front-panel IP65 rating make it appropriate for installation directly on machine cabinets or control panels in factory floor environments.

Technical Specifications

Display Size	12 inch
Display Resolution	800 x 600 pixels (SVGA)
Display Type	TFT color
Touch Technology	Resistive touch screen
Input/Operating Voltage	24 V DC
IP/Protection Rating	IP65 (front panel)
Communication Interface	Ethernet RJ45, RS-232 serial
Operating System	Microsoft Windows
Mounting	Panel mounting (front mount)
Operating Temperature	0 °C to +45 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5% to 95% (non-condensing)
Series/Product Family	SIMATIC Panel PC 670
Certifications	CE, UL

Common Error Codes & System Events

Event ID: 100: Operating system startup failure or boot error detected during POST sequence.
Check hard disk or CompactFlash card integrity. Verify BIOS settings and reseat memory modules. Replace storage media if corrupted.
Event ID: 200: Watchdog timeout triggered, indicating the application software has stopped responding.
Restart the application software. Check for software deadlocks or resource conflicts. Update or reinstall the HMI runtime software if the issue persists.
Event ID: 300: Ethernet communication link failure or network connection lost.
Check Ethernet cable connections and network switch status. Verify IP address configuration and network settings within Windows Device Manager.
Event ID: 400: Touch screen calibration error or touch input not responding correctly.
Recalibrate the touch screen using the Windows touch screen calibration utility. If unresponsive, check the touch controller connection internally or replace the touch overlay.
Event ID: 500: Internal temperature warning — panel PC internal temperature has exceeded the recommended operating threshold.
Check ambient temperature around the unit. Ensure ventilation slots are not blocked. Verify that the cooling fan (if fitted) is operational. Reduce ambient temperature or improve cabinet ventilation.
Event ID: 600: Hard disk or storage media read/write error detected.
Run a disk check utility (chkdsk) to identify and repair file system errors. Back up data immediately and replace the hard disk or CompactFlash card if errors persist.
Event ID: 700: Power supply undervoltage condition detected on the 24 V DC input.
Measure the 24 V DC supply at the input connector. Ensure the supply is within the specified tolerance range. Check wiring and power supply unit output under load.

Frequently Asked Questions

What is the display size and resolution of the 6AV7612-0AB20-0CE0?

The 6AV7612-0AB20-0CE0 features a 12-inch TFT color display with a resolution of 800 x 600 pixels (SVGA).

What operating system does the SIMATIC Panel PC 670 run?

The SIMATIC Panel PC 670 runs Microsoft Windows operating systems, making it compatible with standard industrial HMI and SCADA software including Siemens WinCC.

What is the front panel protection rating of this unit?

The front panel of the 6AV7612-0AB20-0CE0 carries an IP65 protection rating, providing protection against dust ingress and low-pressure water jets.

What communication interfaces are available on this Panel PC?

The unit provides Ethernet (RJ45) and RS-232 serial communication interfaces, enabling connectivity to PLCs, networks, and peripheral devices.

What is the supply voltage required for the SIMATIC Panel PC 670?

The unit requires a 24 V DC supply voltage for operation.

Troubleshooting

Display remains blank after power is applied

Check the 24 V DC supply voltage at the input connector. Verify that the power LED indicator is illuminated. Measure internal fuse continuity if accessible.

Ensure the 24 V DC supply is within tolerance. Replace the internal fuse if blown. If the backlight is faulty, the display inverter or backlight lamp may require replacement.

Touch screen does not respond or registers incorrect touch positions

Attempt to operate the unit using an external USB mouse or keyboard to determine if the issue is isolated to the touch screen. Check Device Manager for touch controller errors.

Recalibrate the touch screen using the Windows calibration tool. If calibration fails, check the internal ribbon cable connection to the touch overlay. Replace the touch screen overlay if damaged.

Unit fails to boot into Windows and displays a boot error

Check the storage media (hard disk or CompactFlash card) for errors using BIOS diagnostics or an external reader. Verify that the boot device is correctly selected in BIOS.

Run chkdsk or a disk repair utility. If the storage media is corrupted or failed, replace it and reinstall the operating system and HMI software from backup or original media.

Ethernet communication is not established with the PLC or network

Check the Ethernet cable and verify link LEDs on the RJ45 port are active. Open Windows Device Manager to confirm the network adapter is recognized and has no errors.

Replace the Ethernet cable if faulty. Verify IP address, subnet mask, and gateway settings. Update the network adapter driver if Device Manager reports a driver issue.

Panel PC overheats and shuts down unexpectedly

Check the ambient temperature around the installation. Inspect ventilation slots for blockage. If the unit has a cooling fan, verify it is spinning correctly.

Clear any obstructions from ventilation slots. Ensure the cabinet ambient temperature is within the 0 to 45 degrees C operating range. Clean internal dust accumulation if accessible and replace the cooling fan if it has failed.

Condition	Repair, Used, Refurbished, New in box (sealed)