Siemens 6AV7612-0AA10-0AE0 SIMATIC Panel PC 670

Name: Siemens 6AV7612-0AA10-0AE0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7612-0AA10-0AE0
Price: 2007.00 EUR
Availability: InStock

€ 2.007,00

Condition

Clear

SKU: 6AV7612-0AA10-0AE0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7612-0AA10-0AE0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted PC designed for demanding human-machine interface (HMI) and visualization tasks in automation environments. This unit combines a flat-panel display with an integrated PC platform, providing a compact and robust solution for process visualization and control.

The SIMATIC Panel PC 670 (6AV7612-0AA10-0AE0) features a 12-inch TFT display with a resolution of 800 x 600 pixels (SVGA) and supports touch screen operation. It is built around an industrial-grade PC architecture running on a Windows-based operating system, with support for standard PC interfaces including USB, serial (RS-232), and Ethernet ports for connectivity to PLCs and SCADA systems. The unit is designed for front-panel mounting with an IP65-rated front bezel, protecting against dust and water ingress in industrial environments.

This Panel PC is widely used in manufacturing, process automation, and machine tool industries where a robust, integrated PC-based HMI solution is required. It is compatible with Siemens SIMATIC WinCC and other SCADA/HMI software packages, making it suitable for integration into Siemens TIA Portal and Step 7 automation architectures. Its panel-mount design and industrial-grade construction make it appropriate for use in control cabinets and operator stations on production lines.

Technical Specifications

Display Size	12 inch
Display Resolution	800 x 600 pixels (SVGA)
Display Type	TFT color LCD
Touch Technology	Resistive touchscreen
Input Voltage	24 V DC
IP Protection Rating (Front)	IP65
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 60 °C
Relative Humidity	5% to 90% (non-condensing)
Communication Interface	Ethernet (RJ45), RS-232, USB
Mounting	Panel mounting
Series/Product Family	SIMATIC Panel PC 670
Certifications	CE, UL
Operating System	Windows XP Embedded / Windows 2000

Common Error Codes & System Events

Event ID: 1000: Application error or unexpected software exception on the Panel PC operating system.
Check the Windows Event Viewer for detailed error logs. Restart the application or reboot the Panel PC. Reinstall the HMI software if the error persists.
Event ID: 7000: A system service failed to start during Windows boot sequence.
Check the Windows Event Viewer under System logs. Verify that all required services are enabled and set to automatic start. Repair or reinstall the operating system if necessary.
Communication Error: Loss of communication between the Panel PC and the connected PLC or automation controller.
Check Ethernet or serial cable connections. Verify IP address configuration and network settings. Confirm that the PLC is powered and the communication driver is correctly configured in WinCC or the HMI application.
Watchdog Timeout: The system watchdog has detected that the operating system or application has stopped responding.
Perform a controlled reboot of the Panel PC. Check for resource-intensive background processes. If the issue recurs, investigate hardware faults such as failing RAM or storage media.
Hard Disk Error: The internal storage device (hard disk or CompactFlash) has reported a read/write error or failure.
Back up project data immediately if possible. Run a disk check utility. Replace the internal hard disk or CompactFlash card and restore the operating system and HMI project from backup.
Temperature Warning: Internal temperature of the Panel PC has exceeded the recommended operating threshold.
Check that ventilation slots are not blocked. Verify that the ambient temperature is within the specified operating range (0 °C to 45 °C). Clean any dust from cooling vents and ensure adequate airflow around the unit.
Power Supply Fault: The 24 V DC supply voltage is outside the permissible range, causing the unit to shut down or fail to start.
Measure the supply voltage at the power connector and confirm it is within the specified 24 V DC tolerance. Check the power supply unit and wiring for faults. Replace the power supply if voltage is out of range.

Frequently Asked Questions

What is the supply voltage for the Siemens 6AV7612-0AA10-0AE0?

The unit operates on a 24 V DC supply voltage. Ensure the power source is stable and within the permissible tolerance range before powering the device.

What HMI software is compatible with the SIMATIC Panel PC 670?

The Panel PC 670 is compatible with Siemens SIMATIC WinCC, WinCC flexible, and other PC-based SCADA and HMI software packages that run on Windows XP Embedded or Windows 2000.

What is the front panel protection rating of this unit?

The front panel of the 6AV7612-0AA10-0AE0 carries an IP65 protection rating, making it resistant to dust and low-pressure water jets.

Can the internal storage be replaced or upgraded?

Yes, the SIMATIC Panel PC 670 uses a replaceable internal storage medium (hard disk or CompactFlash card). Replacement storage should be sourced from Siemens or a qualified supplier and the operating system and HMI project must be restored after replacement.

What communication interfaces are available on this Panel PC?

The unit provides Ethernet (RJ45), RS-232 serial, and USB interfaces, enabling connectivity to PLCs, network infrastructure, and peripheral devices.

Troubleshooting

Panel PC does not power on after 24 V DC is applied

Measure the supply voltage at the power input connector to confirm it is within the specified range. Inspect the power cable and connector for damage or loose connections.

Ensure the 24 V DC supply is stable and correctly wired. If voltage is confirmed correct but the unit still does not power on, the internal power supply board may be faulty and require replacement or repair.

Display is blank or shows no image after power on

Check whether the Panel PC is booting by listening for hard disk activity or observing any LED indicators. Verify the backlight is functioning by shining a light at the screen to check for a faint image.

If the backlight has failed, the display or inverter board requires replacement. If the unit is booting but there is no display output, check display cable connections internally. Restore or reinstall the operating system if a software fault is suspected.

Touchscreen does not respond or is inaccurate

Determine whether the issue is hardware or software by checking if the touchscreen is recognized in the Windows Device Manager. Attempt a touchscreen recalibration using the Windows control panel or the Siemens calibration utility.

Recalibrate the touchscreen through the operating system settings. If the touchscreen remains unresponsive after recalibration, the touch controller or the resistive touch overlay may be damaged and require replacement.

Loss of communication with PLC or SCADA system

Check all Ethernet and serial cable connections. Verify the IP address and subnet mask configuration on the Panel PC matches the network settings. Ping the PLC from the Panel PC to test network connectivity.

Correct any IP address conflicts or misconfiguration. Replace faulty cables or connectors. Reinstall or reconfigure the communication driver in the HMI software if the hardware connections are confirmed good.

Panel PC reboots unexpectedly or freezes during operation

Check the Windows Event Viewer for critical errors or application crashes logged before the reboot. Monitor the internal temperature and verify the supply voltage is stable under load.

Address any overtemperature conditions by improving ventilation. Replace the internal storage medium if disk errors are logged. If RAM is suspected, test with a memory diagnostic tool and replace if faulty.

Condition	Repair, Used, Refurbished, New in box (sealed)