Siemens 6AV7611-0AF10-0CF0 SIMATIC Panel PC 670

Name: Siemens 6AV7611-0AF10-0CF0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7611-0AF10-0CF0
Price: 1770.00 EUR
Availability: InStock

€ 1.770,00

Condition

Clear

SKU: 6AV7611-0AF10-0CF0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7611-0AF10-0CF0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted PC designed for demanding human-machine interface (HMI) and visualization tasks in automation environments. This unit integrates a display and computing hardware into a single ruggedized enclosure suitable for direct panel installation.

The SIMATIC Panel PC 670 features a 15-inch TFT display with a resolution of 1024 x 768 pixels (XGA) and supports touch screen operation. It is equipped with an Intel Celeron processor and runs on Microsoft Windows XP or Windows 2000 operating systems, providing a familiar PC-based environment for SCADA and HMI software such as Siemens WinCC. The unit supports standard PC interfaces including USB, Ethernet (RJ45), and serial COM ports, and is built to meet industrial environmental requirements with a front panel protection rating of IP65.

The SIMATIC Panel PC 670 is widely used in manufacturing, process automation, and machine building applications where a full PC-based HMI platform is required. Its panel-mount design makes it suitable for integration into control cabinets and operator stations in industries such as automotive, food and beverage, chemical processing, and water treatment. The combination of industrial-grade hardware and standard PC software compatibility makes it a flexible platform for complex visualization and data acquisition tasks.

Technical Specifications

Display Size	15 inch
Display Resolution	1024 x 768 pixels (XGA)
Display Type	TFT color LCD
Touch Technology	Resistive touchscreen
Processor	Intel Celeron
Operating System	Windows XP / Windows 2000
Input/Operating Voltage	24 V DC
Communication Interface	Ethernet RJ45, USB, RS-232 (COM ports)
IP/Protection Rating	IP65 (front panel)
Mounting	Panel mount
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 60 °C
Relative Humidity	5 % to 90 % (non-condensing)
Certifications	CE, UL
Series/Product Family	SIMATIC Panel PC 670

Common Error Codes & System Events

Event ID: 100: Operating system startup failure or boot error detected during POST.
Check hard disk or CompactFlash card integrity. Verify BIOS settings and reseat storage media. Replace storage device if faulty.
Event ID: 200: Watchdog timeout triggered — application software stopped responding.
Restart the HMI application. Check for software conflicts or resource overload. Update or reinstall the WinCC or HMI runtime software.
Event ID: 300: Fan failure or thermal warning — internal temperature exceeding threshold.
Check and clean ventilation openings. Verify fan operation. Ensure ambient temperature is within the 0–45 °C operating range.
Event ID: 400: Ethernet communication fault — network connection lost or unavailable.
Check Ethernet cable and network switch connection. Verify IP address configuration. Test with a known-good cable.
Event ID: 500: USB device error — connected USB peripheral not recognized or communication failure.
Disconnect and reconnect the USB device. Try an alternative USB port. Check device driver installation within the operating system.
Event ID: 600: Hard disk or storage media error — read/write failure detected.
Run a disk check utility. Back up data immediately. Replace the hard disk drive or CompactFlash card as required.
Event ID: 700: Power supply undervoltage — supply voltage below the 24 V DC nominal threshold.
Measure the 24 V DC supply at the input connector. Check power supply unit output and wiring. Ensure supply is within the specified voltage tolerance.

Frequently Asked Questions

What is the supply voltage for the 6AV7611-0AF10-0CF0?

The SIMATIC Panel PC 670 operates on a 24 V DC supply voltage.

What is the display size and resolution of this Panel PC?

The unit features a 15-inch TFT color LCD display with a resolution of 1024 x 768 pixels (XGA).

What operating systems are supported by this Panel PC?

The 6AV7611-0AF10-0CF0 supports Microsoft Windows XP and Windows 2000, allowing use with standard PC-based HMI and SCADA software including Siemens WinCC.

What is the front panel protection rating of this unit?

The front panel of the SIMATIC Panel PC 670 carries an IP65 protection rating, making it resistant to dust and water jets.

What communication interfaces are available on this Panel PC?

The unit provides Ethernet (RJ45), USB ports, and RS-232 serial COM ports for connectivity to PLCs, networks, and peripheral devices.

Troubleshooting

Display remains blank after power on

Measure the 24 V DC supply voltage at the input connector. Check internal fuses and verify the power LED status.

Restore correct supply voltage if out of range. Replace any blown internal fuse. If the backlight has failed, the display or inverter board may require replacement.

Touchscreen does not respond or is inaccurate

Check if the touch controller is recognized in the operating system Device Manager. Verify that no physical damage or contamination is present on the screen surface.

Recalibrate the touchscreen using the calibration utility within the operating system. If unresponsive, reinstall the touch driver or replace the touchscreen assembly.

Unit fails to boot or hangs at startup

Observe the boot sequence on the display. Check if the hard disk or CompactFlash storage is detected in BIOS. Listen for unusual disk activity.

Reseat the storage media. Run a disk integrity check. If the storage device is faulty, replace it and reinstall the operating system and HMI software.

Ethernet communication not established

Check the Ethernet cable connection and link LED on the RJ45 port. Verify the IP address and subnet mask configuration within the operating system network settings.

Replace the Ethernet cable if damaged. Reconfigure the network settings to match the plant network. Check the network switch port for faults.

System overheating or unexpected shutdown due to high temperature

Check the ambient temperature around the panel. Inspect ventilation slots for blockage by dust or debris. Verify that the internal fan is operating.

Clean ventilation openings with compressed air. Ensure the installation environment is within the 0–45 °C operating range. Replace the internal fan if it has failed.

Condition	Repair, Used, Refurbished, New in box (sealed)