Siemens 6AV7611-0AF10-0BJ0 SIMATIC Panel PC 670

Name: Siemens 6AV7611-0AF10-0BJ0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7611-0AF10-0BJ0
Price: 1770.00 EUR
Availability: InStock

€ 1.770,00

Condition

Clear

SKU: 6AV7611-0AF10-0BJ0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7611-0AF10-0BJ0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted PC designed for demanding human-machine interface (HMI) and visualization tasks in automation environments. This unit combines a built-in display with a full PC architecture, enabling it to run standard Windows-based SCADA and HMI software alongside process control applications.

The SIMATIC Panel PC 670 features a 15-inch TFT display with a resolution of 1024 x 768 pixels and supports touch screen input for intuitive operator interaction. It is built around an industrial-grade processor platform and includes multiple communication interfaces such as Ethernet (RJ45), USB ports, and serial interfaces (RS-232/RS-422/RS-485), enabling integration with a wide range of automation systems and field devices. The unit is designed for front-panel mounting with an IP65-rated front bezel, providing protection against dust and water ingress in industrial environments. It supports operation on a 24 V DC supply and is compatible with Siemens SIMATIC WinCC and other standard HMI software packages.

The SIMATIC Panel PC 670 is widely used in manufacturing, process automation, and machine building applications where a full PC-based HMI solution is required. It is suitable for industries such as automotive, food and beverage, chemical processing, and water treatment, where robust visualization and data logging capabilities are essential. Its panel-mount design and industrial-grade construction make it appropriate for integration directly into control cabinets and operator panels on the factory floor.

Technical Specifications

Display Size	15 inch
Display Resolution	1024 x 768 pixels
Display Type	TFT Color LCD
Touch Technology	Resistive Touch Screen
Input Voltage	24 V DC
IP Protection Rating (Front)	IP65
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 60 °C
Relative Humidity	10 % to 90 % (non-condensing)
Communication Interfaces	Ethernet (RJ45), USB, RS-232, RS-422/RS-485
Mounting	Panel Mount (front mounting)
Series/Product Family	SIMATIC Panel PC 670
Certifications	CE, UL
Operating System	Windows XP Embedded / Windows 2000

Common Error Codes & System Events

Event ID: 1000: Application error – an HMI or SCADA application has crashed or terminated unexpectedly on the Panel PC.
Check the Windows Event Viewer for detailed error logs. Restart the application. If recurring, check for software conflicts or corrupted installation files and reinstall the HMI software.
Event ID: 7026: A device driver failed to load during Windows startup, which may affect communication interfaces or peripherals.
Check Device Manager for driver errors. Reinstall or update the relevant driver. Verify hardware connections for the affected interface (e.g., Ethernet, serial port).
Event ID: 6008: The system was shut down unexpectedly, indicating a previous unclean shutdown or power loss.
Check the 24 V DC power supply for stability and correct voltage. Inspect power connectors and cabling. Review application logs for any software-induced shutdown.
BIOS POST Error: The Panel PC fails to complete the Power-On Self-Test during boot, indicating a hardware fault such as failed RAM or storage device.
Check and reseat RAM modules and CompactFlash/hard disk connections. If the error persists, replace the faulty hardware component or return the unit for repair.
WinCC Runtime Error: Siemens WinCC HMI runtime software reports a configuration or communication error, preventing normal operation of the visualization project.
Verify the WinCC project configuration and PLC communication settings. Check Ethernet or serial connections to the PLC. Restart the WinCC runtime and reload the project.
Network Communication Fault: Loss of communication between the Panel PC and connected PLCs or network devices via Ethernet or serial interface.
Check physical cable connections and network switch status. Verify IP address configuration and subnet settings. Test connectivity using ping. Check PLC communication driver settings in the HMI software.
Storage Device Error: The operating system reports read/write errors on the CompactFlash card or hard disk drive, which may cause application instability or failure to boot.
Run a disk check utility (chkdsk) to identify and repair file system errors. Back up data immediately. Replace the CompactFlash card or hard disk if errors persist.

Frequently Asked Questions

What is the supply voltage for the 6AV7611-0AF10-0BJ0?

The SIMATIC Panel PC 670 operates on a 24 V DC power supply. Ensure the supply is stable and within the specified tolerance range to prevent unexpected shutdowns.

What operating system does the 6AV7611-0AF10-0BJ0 run?

This Panel PC is typically supplied with Windows XP Embedded or Windows 2000, depending on the configuration ordered. It supports standard Windows-based HMI and SCADA software such as Siemens WinCC.

What is the IP protection rating of the 6AV7611-0AF10-0BJ0?

The front panel of the 6AV7611-0AF10-0BJ0 is rated IP65, providing protection against dust and low-pressure water jets. The rear of the unit is not rated to the same level and should be protected within a suitable enclosure.

What communication interfaces are available on this Panel PC?

The unit provides Ethernet (RJ45), USB ports, and serial interfaces (RS-232 and RS-422/RS-485), allowing connection to a wide range of PLCs, field devices, and network infrastructure.

Is the 6AV7611-0AF10-0BJ0 compatible with Siemens SIMATIC S7 PLCs?

Yes, the Panel PC 670 is compatible with Siemens SIMATIC S7-300 and S7-400 PLCs via Ethernet or serial communication using appropriate drivers and WinCC or STEP 7 software configurations.

Troubleshooting

Display remains blank after power is applied

Check that the 24 V DC supply voltage is present and within tolerance at the power connector. Verify that the power LED indicator is active. Inspect internal fuse and backlight inverter connections.

Restore correct supply voltage if out of range. Replace the internal fuse if blown. If the backlight has failed, replace the backlight inverter or the display assembly. If no boot activity is detected, the main board may require repair or replacement.

Touch screen does not respond or responds inaccurately

Determine whether the issue is a complete lack of response or positional inaccuracy. Check if the touch controller is recognized in Windows Device Manager. Inspect the touch screen connector on the main board.

Recalibrate the touch screen using the Windows touch calibration utility. If the controller is not recognized, reinstall the touch screen driver. If the touch panel is physically damaged or unresponsive after driver reinstallation, replace the touch screen assembly.

Panel PC fails to boot and displays BIOS error or stops at POST screen

Listen for POST beep codes and note any error messages on screen. Check that RAM modules and the CompactFlash card or hard disk are properly seated. Attempt to boot from an external device to isolate storage failure.

Reseat RAM and storage devices. Replace the CompactFlash card or hard disk with a correctly imaged replacement. If the main board fails POST with no peripheral issues, the board requires professional repair or replacement.

Loss of communication with PLC or network devices

Check the Ethernet cable and switch port status. Verify the IP address configuration in Windows Network Settings. Use the ping command to test connectivity to the PLC or network device. Check the HMI software communication driver configuration.

Replace faulty Ethernet cables or switch ports. Correct IP address and subnet mask settings. Update or reinstall communication drivers. If the Ethernet port is physically damaged, use a USB-to-Ethernet adapter or arrange repair of the network interface.

HMI application crashes repeatedly or fails to start

Review the Windows Event Viewer Application and System logs for error codes and timestamps. Check available disk space and RAM. Verify that the WinCC or HMI project files are not corrupted.

Free up disk space if storage is near capacity. Repair or reinstall the HMI software. Restore the project from a known good backup. If hardware memory errors are suspected, run a memory diagnostic tool and replace faulty RAM modules.

Condition	Repair, Used, Refurbished, New in box (sealed)