Siemens 6AV7611-0AE30-0CE0 SIMATIC Panel PC 670

Name: Siemens 6AV7611-0AE30-0CE0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7611-0AE30-0CE0
Price: 1770.00 EUR
Availability: InStock

€ 1.770,00

Condition

Clear

SKU: 6AV7611-0AE30-0CE0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7611-0AE30-0CE0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted computing platform designed for demanding human-machine interface (HMI) and visualization tasks in automation environments. This unit integrates a flat-panel display with an embedded PC architecture, providing a compact all-in-one solution for process visualization and control.

The SIMATIC Panel PC 670 features a 15-inch TFT display with a resolution of 1024 x 768 pixels (XGA) and supports touch screen or keypad operation depending on the configuration. It is equipped with an Intel Celeron or Pentium processor, supports Windows XP Professional or Windows 2000 as the operating system, and provides standard PC interfaces including USB, serial (COM), and Ethernet ports for connectivity. The unit is designed for front-panel mounting with an IP65 protection rating on the front face, making it resistant to dust and water ingress in industrial environments.

The SIMATIC Panel PC 670 is widely deployed in manufacturing, process automation, and machine building applications where a full PC-based HMI platform is required. It is suitable for use with Siemens SIMATIC WinCC, WinCC flexible, and other SCADA or visualization software packages. Industries such as automotive, food and beverage, chemical processing, and discrete manufacturing commonly utilize this platform for operator workstations and supervisory control applications.

Technical Specifications

Display Size	15 inch
Display Resolution	1024 x 768 pixels (XGA)
Display Type	TFT color LCD
Display Colors	16.7 million colors
Touch Technology	Resistive touch screen
Input/Operating Voltage	24 V DC
Power Consumption	Approx. 60 W
IP Protection Rating (Front)	IP65
IP Protection Rating (Rear)	IP20
Operating Temperature	0 °C to +45 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5% to 90% (non-condensing)
Communication Interface	Ethernet (RJ45), USB, RS-232 (COM)
Operating System	Windows XP Professional
Mounting	Panel mounting (front flush)
Certifications	CE, UL, cUL

Common Error Codes & System Events

Event ID: 1000: Application error in the operating system or HMI runtime software has caused an unexpected termination.
Check the Windows Event Viewer for detailed error logs. Reinstall or repair the HMI runtime software (e.g., WinCC flexible Runtime) if the issue persists.
Event ID: 6008: The system was shut down unexpectedly, indicating a previous unclean shutdown or power loss.
Check the 24 V DC power supply for stability and correct voltage. Inspect power connections and ensure an uninterruptible power supply (UPS) is used if power fluctuations are present.
BIOS POST Error: Hardware initialization failure detected during Power-On Self-Test, which may indicate a memory or hardware fault.
Reseat RAM modules and check all internal connectors. If the error persists, replace the faulty hardware component identified in the POST message.
WinCC Runtime Error: WinCC or WinCC flexible runtime fails to start or crashes during operation, often due to corrupted project files or licensing issues.
Verify the software license dongle or license file is present and valid. Reload the project from a backup and check for project file corruption.
Network Connection Lost: The Ethernet interface loses communication with the PLC or network, causing loss of process data on the HMI display.
Check Ethernet cable and switch/hub connections. Verify IP address configuration and ensure the connected PLC or server is online and reachable.
Touchscreen Calibration Error: The touch input is misaligned or unresponsive, indicating a calibration drift or touch controller fault.
Run the touchscreen calibration utility from the Windows Control Panel. If calibration fails repeatedly, inspect the touch controller hardware and replace the touch screen assembly if necessary.
Hard Disk Error: The internal hard disk or CompactFlash storage device reports read/write errors or is not detected during boot.
Run a disk diagnostic utility (e.g., chkdsk) to identify bad sectors. Back up all data immediately and replace the storage device if errors are confirmed.

Frequently Asked Questions

What operating system does the 6AV7611-0AE30-0CE0 run?

This Panel PC 670 variant runs Windows XP Professional as its operating system, which is pre-installed and configured for industrial HMI use.

What HMI software is compatible with this Panel PC?

The unit is compatible with Siemens SIMATIC WinCC, WinCC flexible Runtime, and other standard Windows-based SCADA and visualization software packages.

What is the display size and resolution of this unit?

The 6AV7611-0AE30-0CE0 features a 15-inch TFT color display with a resolution of 1024 x 768 pixels (XGA).

What is the supply voltage for this Panel PC?

The unit operates on a 24 V DC supply voltage, which is standard for industrial panel-mounted devices in automation environments.

What is the front panel protection rating of this device?

The front panel of the SIMATIC Panel PC 670 carries an IP65 protection rating, providing full dust protection and protection against water jets.

Troubleshooting

Panel PC does not power on after 24 V DC is applied

Measure the 24 V DC supply voltage at the power input connector to confirm correct voltage level. Check the internal fuse and inspect the power supply board for visible damage.

Replace the internal fuse if blown. If the power supply board is faulty, replace it or send the unit for repair. Ensure the supply voltage is within the specified 24 V DC tolerance range.

Display is blank or backlight does not illuminate

Confirm the unit is powered on by checking for fan activity or HDD LED activity. Test the backlight inverter and CCFL backlight lamp for continuity and function.

Replace the CCFL backlight lamp or the inverter board if the backlight is confirmed faulty. If the display panel itself is defective, replace the TFT display assembly.

Touchscreen input is inaccurate or not responding

Attempt to recalibrate the touchscreen using the Windows Control Panel calibration utility. Check the USB or serial connection between the touch controller and the motherboard.

Recalibrate the touchscreen. If the problem persists, inspect and reseat the touch controller cable. Replace the touch screen assembly if the controller hardware is defective.

Unit boots to BIOS or fails to load Windows

Check the internal hard disk or CompactFlash card for detection in BIOS. Run a disk diagnostic to identify storage media failure or corrupted boot sector.

Restore the operating system from a backup image onto a replacement hard disk or CompactFlash card. Ensure the correct boot device is selected in BIOS settings.

Loss of communication between Panel PC and PLC

Verify the Ethernet cable connection and check the IP address configuration in Windows Network Settings. Ping the PLC from the Panel PC to confirm network reachability.

Correct any IP address conflicts or misconfiguration. Replace the Ethernet cable if damaged. Check the PLC communication settings and ensure the correct communication driver is installed and configured in the HMI software.

Condition	Repair, Used, Refurbished, New in box (sealed)