Siemens 6AV7611-0AE10-0CJ0 SIMATIC Panel PC 670

Name: Siemens 6AV7611-0AE10-0CJ0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7611-0AE10-0CJ0
Price: 1770.00 EUR
Availability: InStock

€ 1.770,00

Condition

Clear

SKU: 6AV7611-0AE10-0CJ0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7611-0AE10-0CJ0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted PC designed for demanding human-machine interface (HMI) and visualization tasks in automation environments. The unit integrates a display, computing hardware, and industrial-grade I/O into a single compact enclosure suitable for control cabinet or machine panel installation.

The SIMATIC Panel PC 670 features a 12-inch TFT display with a resolution of 800 x 600 pixels (SVGA) and is equipped with a touch-sensitive screen for operator interaction. It is powered by an industrial-grade processor and runs Microsoft Windows operating systems, supporting SIMATIC WinCC and other Siemens visualization software. The unit provides communication interfaces including Ethernet (RJ45) and serial ports, and supports expansion via PCI slots for additional interface cards. It is built to operate in industrial environments with an IP65 protection rating on the front panel.

The SIMATIC Panel PC 670 is widely used in manufacturing, process automation, and machine tool industries where a full PC-based HMI platform is required. Its ability to run standard Windows software alongside SIMATIC visualization packages makes it suitable for complex SCADA, data logging, and recipe management applications. The rugged construction and industrial-grade components make it appropriate for continuous operation in factory floor environments with exposure to vibration, dust, and temperature variation.

Technical Specifications

Display Size	12 inch
Display Resolution	800 x 600 pixels (SVGA)
Display Type	TFT Color LCD
Touch Technology	Resistive touchscreen
Input/Operating Voltage	24 V DC
IP/Protection Rating	IP65 (front panel)
Operating Temperature	0 °C to +45 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5% to 90% (non-condensing)
Communication Interface	Ethernet (RJ45), RS-232, RS-422/485
Operating System	Windows XP / Windows 2000
Mounting	Panel mounting
Series/Product Family	SIMATIC Panel PC 670
Certifications	CE, UL

Common Error Codes & System Events

Event ID: 1000: Application error in the operating system or SIMATIC software; an unexpected exception has occurred in the running application.
Check Windows Event Viewer for detailed error information. Restart the application or reboot the Panel PC. Update or reinstall the affected software if the error persists.
Event ID: 7034: A service terminated unexpectedly, typically related to a SIMATIC WinCC or communication service.
Check Windows Event Viewer for the specific service name. Restart the service manually via Windows Services manager or reboot the device. Reinstall the service if it continues to fail.
Event ID: 7036: A system service entered a stopped state, which may interrupt HMI communication or visualization.
Identify the stopped service in the Event Viewer. Restart the service and configure it to restart automatically on failure. Investigate root cause such as license issues or corrupted installation.
BIOS POST Error: Hardware initialization failure during power-on self-test, indicating a memory, CPU, or hardware component fault.
Check that all internal memory modules and expansion cards are properly seated. Clear CMOS settings and retry. Replace faulty hardware components if the error persists after reseating.
WinCC Runtime Error: SIMATIC WinCC runtime fails to start or crashes, preventing the HMI project from loading.
Verify that the WinCC license is valid and present. Check project file integrity and restore from backup if corrupted. Reinstall WinCC runtime if the issue cannot be resolved through project repair.
Communication Timeout: Loss of communication between the Panel PC and the connected PLC or automation controller, resulting in a connection timeout alarm.
Check Ethernet or serial cable connections and verify network settings including IP address and subnet mask. Confirm the PLC is powered and running. Review WinCC communication channel configuration for correct parameters.
Hard Disk Error: The internal hard disk or CompactFlash storage device has reported a read/write error or is not detected by the system.
Run a disk diagnostic utility to assess drive health. Back up project data immediately if the drive is still accessible. Replace the internal hard disk or CompactFlash card and restore the operating system and project from backup.

Frequently Asked Questions

What operating systems are supported by the SIMATIC Panel PC 670 (6AV7611-0AE10-0CJ0)?

The SIMATIC Panel PC 670 supports Microsoft Windows 2000 and Windows XP as its operating systems. It is designed to run SIMATIC WinCC and other Siemens visualization software on these platforms.

What is the display size and resolution of this Panel PC?

The 6AV7611-0AE10-0CJ0 features a 12-inch TFT color display with a resolution of 800 x 600 pixels (SVGA). The display includes a resistive touchscreen for operator input.

What communication interfaces are available on this unit?

The unit provides Ethernet (RJ45) for network connectivity, as well as RS-232 and RS-422/485 serial interfaces for PLC and peripheral communication. Additional interfaces can be added via PCI expansion slots.

What is the front panel protection rating of this Panel PC?

The front panel of the SIMATIC Panel PC 670 carries an IP65 protection rating, making it resistant to dust ingress and low-pressure water jets, suitable for industrial panel installation.

Is this Panel PC compatible with SIMATIC WinCC?

Yes, the SIMATIC Panel PC 670 is designed to run SIMATIC WinCC visualization software. It is fully compatible with Siemens STEP 7 and WinCC-based automation projects.

Troubleshooting

Panel PC does not boot after power on

Check that the 24 V DC supply voltage is present and within tolerance at the power input connector. Verify that the internal hard disk or CompactFlash storage is detected in the BIOS setup menu.

Ensure the power supply is stable and correctly wired. If the storage device is not detected, reseat or replace the hard disk or CompactFlash card. Restore the operating system from a backup image if the drive is detected but the OS is corrupted.

Touchscreen does not respond or is inaccurate

Determine whether the issue is a complete lack of response or positional inaccuracy. Check if the touchscreen controller is recognized in Windows Device Manager and whether the calibration has been performed.

Recalibrate the touchscreen using the Windows touchscreen calibration utility. If the screen is completely unresponsive, check the internal ribbon cable connection between the display and the touchscreen controller board. Replace the touchscreen overlay if the hardware is confirmed faulty.

Loss of communication with PLC

Verify the Ethernet or serial cable is securely connected at both the Panel PC and PLC ends. Check the IP address configuration and confirm the Panel PC can ping the PLC on the network. Review WinCC communication channel settings for correct driver and connection parameters.

Correct any IP address conflicts or misconfigured subnet settings. Replace the communication cable if it is damaged. Update or reconfigure the WinCC communication driver to match the PLC protocol and connection parameters.

Display shows image but touchscreen input is not registered

Check Windows Device Manager for touchscreen driver errors or missing drivers. Test whether a USB mouse can be used to interact with the system, which would confirm the OS is running but the touch input is failing.

Reinstall the touchscreen driver from the Siemens recovery media or driver package. If the driver installs correctly but the issue persists, inspect the internal touchscreen controller connection and replace the controller board if necessary.

Panel PC runs slowly or freezes during operation

Check CPU and memory utilization in Windows Task Manager. Inspect the hard disk for errors using disk diagnostic tools and check available free space. Verify that the operating temperature is within the specified range of 0 °C to +45 °C.

Close unnecessary background applications and services to free up system resources. Defragment the hard disk or replace it with a new CompactFlash or SSD solution. Ensure adequate ventilation around the panel to prevent thermal throttling or overheating.

Condition	Repair, Used, Refurbished, New in box (sealed)