Siemens 6AV7611-0AE10-0BF0 SIMATIC Panel PC 670

Name: Siemens 6AV7611-0AE10-0BF0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7611-0AE10-0BF0
Price: 1770.00 EUR
Availability: InStock

€ 1.770,00

Condition

Clear

SKU: 6AV7611-0AE10-0BF0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7611-0AE10-0BF0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted PC designed for demanding human-machine interface (HMI) and visualization tasks in automation environments. The unit integrates a display, computing hardware, and industrial I/O into a single compact panel-mount enclosure suitable for control cabinet front-panel installation.

The SIMATIC Panel PC 670 features a 15-inch TFT color display with a resolution of 1024 x 768 pixels (XGA) and supports touch screen operation. It is built around an industrial-grade processor platform and runs Microsoft Windows operating systems, enabling compatibility with SIMATIC WinCC and other SCADA/HMI software packages. The unit provides standard PC interfaces including USB ports, serial COM ports, and Ethernet connectivity, along with an integrated PCI slot for expansion. The front panel is rated to IP65 for protection against dust and water ingress.

The SIMATIC Panel PC 670 is widely deployed in manufacturing, process automation, and machine tool industries where a full PC-based HMI platform is required. Its rugged construction and industrial-grade components make it suitable for continuous operation in factory floor environments with elevated temperatures, vibration, and electrical noise. It is commonly used as a visualization station for SCADA systems, process monitoring, and complex operator interface applications requiring Windows-based software execution.

Technical Specifications

Display Size	15 inch
Display Resolution	1024 x 768 pixels (XGA)
Display Type	TFT Color LCD
Touch Technology	Resistive Touch Screen
Input Voltage	24 V DC
Operating Temperature	0 °C to +50 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5% to 90% (non-condensing)
IP Rating (Front)	IP65
IP Rating (Rear)	IP20
Communication Interface	Ethernet (RJ45), USB, RS-232 (COM)
Mounting	Panel Mount
Series/Product Family	SIMATIC Panel PC 670
Certifications	CE, UL

Common Error Codes & System Events

Event ID: 100: Operating system startup failure or boot error detected during POST sequence.
Check hard disk or CompactFlash card integrity. Verify BIOS settings and reseat storage media. Replace storage device if faulty.
Event ID: 200: Fan failure or thermal warning — cooling fan not operating within expected speed range.
Inspect and clean the cooling fan. Replace the fan unit if it is not spinning or is running below rated speed.
Event ID: 300: Watchdog timeout — the application software failed to reset the hardware watchdog within the required interval.
Check the HMI/SCADA application for software hangs or excessive CPU load. Restart the application or reboot the Panel PC.
Event ID: 400: Ethernet communication loss — network connection to PLC or SCADA server interrupted.
Verify Ethernet cable connections and switch/hub status. Check IP address configuration and network settings in Windows.
Event ID: 500: Touch screen calibration error — touch input coordinates are misaligned or unresponsive.
Run the touch screen calibration utility from the Windows control panel. If unresponsive, check the touch controller connection internally.
Event ID: 600: UPS battery low or UPS module not detected — uninterruptible power supply voltage below threshold.
Replace the UPS battery module. Verify UPS module seating and connector integrity.
Event ID: 700: Hard disk or storage media error — read/write failure detected on the system drive.
Run disk diagnostics. Back up data immediately and replace the hard disk or CompactFlash storage module.

Frequently Asked Questions

What operating system does the SIMATIC Panel PC 670 (6AV7611-0AE10-0BF0) support?

The SIMATIC Panel PC 670 supports Microsoft Windows XP Professional and Windows 2000 Professional, enabling compatibility with SIMATIC WinCC and other Windows-based HMI and SCADA software.

What is the display size and resolution of this Panel PC?

The 6AV7611-0AE10-0BF0 features a 15-inch TFT color display with a resolution of 1024 x 768 pixels (XGA).

What is the front panel protection rating of this unit?

The front panel of the SIMATIC Panel PC 670 is rated to IP65, providing full protection against dust ingress and protection against water jets.

What communication interfaces are available on this Panel PC?

The unit provides Ethernet (RJ45), USB ports, and RS-232 serial COM ports as standard interfaces, with an internal PCI expansion slot available for additional communication modules.

Is this Panel PC compatible with Siemens SIMATIC WinCC?

Yes, the SIMATIC Panel PC 670 is designed to run SIMATIC WinCC and other Siemens HMI visualization software packages natively under its supported Windows operating systems.

Troubleshooting

Display remains blank after power is applied

Check the 24 V DC supply voltage at the power input connector. Verify the internal fuse and inspect the backlight inverter board for visible damage.

Restore correct 24 V DC supply. Replace the backlight inverter or CCFL backlight lamp if the display remains dark with a confirmed good power supply.

Touch screen does not respond or registers incorrect touch positions

Attempt touch screen recalibration via the Windows control panel utility. Check for physical damage or contamination on the touch surface.

Recalibrate the touch screen using the Siemens or Windows calibration tool. If the issue persists, replace the touch screen overlay or touch controller board.

Panel PC fails to boot or continuously restarts

Check the hard disk or CompactFlash storage module for errors using disk diagnostic tools. Verify BIOS settings and check for corrupted operating system files.

Replace the storage media and reinstall the operating system and HMI software. Ensure BIOS boot order is correctly configured.

Ethernet communication to PLC or SCADA server is lost intermittently

Inspect the Ethernet cable and RJ45 connector for damage. Verify IP address and subnet mask settings in Windows network configuration.

Replace the Ethernet cable and verify network switch port status. Reconfigure network settings if IP conflicts are detected.

Unit overheats and shuts down unexpectedly

Check that ventilation slots are not blocked and that the ambient temperature is within the 0 to 50 °C operating range. Inspect the internal cooling fan for correct operation.

Clean ventilation openings and ensure adequate airflow around the enclosure. Replace the internal cooling fan if it is not operating correctly.

Condition	Repair, Used, Refurbished, New in box (sealed)