Siemens 6AV7605-1BE23-0CB1 SIMATIC Panel PC 670

Name: Siemens 6AV7605-1BE23-0CB1 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7605-1BE23-0CB1
Price: 4473.00 EUR
Availability: InStock

€ 4.473,00

Condition

Clear

SKU: 6AV7605-1BE23-0CB1 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7605-1BE23-0CB1 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted PC designed for demanding human-machine interface (HMI) and visualization tasks in automation environments. The unit integrates computing hardware and a display into a single rugged enclosure suitable for direct panel installation.

The SIMATIC Panel PC 670 features a 15-inch TFT display with a resolution of 1024 x 768 pixels (XGA) and supports touch screen operation. It is equipped with an Intel Celeron processor and runs Microsoft Windows XP Professional or Windows XP Embedded, providing a familiar PC-based environment for SCADA and HMI software such as Siemens WinCC. The unit includes standard PC interfaces including USB ports, Ethernet (RJ45), and serial COM ports, and is built to meet industrial requirements with a fanless or low-noise cooling design and a robust front panel rated to IP65.

The SIMATIC Panel PC 670 is widely used in manufacturing, process automation, and machine building applications where a full PC-based visualization platform is required. It is suitable for industries such as automotive, food and beverage, chemical processing, and water treatment, where operators need a reliable, panel-integrated computing solution capable of running complex HMI and SCADA applications alongside standard PC software.

Technical Specifications

Display Size	15 inch
Display Resolution	1024 x 768 px (XGA)
Display Type	TFT color LCD
Touch Technology	Resistive touchscreen
Processor	Intel Celeron M
Operating System	Windows XP Professional / Windows XP Embedded
Input/Operating Voltage	24 V DC
Communication Interface	Ethernet RJ45, USB 2.0, COM (RS-232)
IP/Protection Rating	IP65 (front panel)
Mounting	Panel mounting
Operating Temperature	0 °C to +50 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5 % to 90 % (non-condensing)
Certifications	CE, UL, cULus

Common Error Codes & System Events

Event ID: 100: System startup error — the operating system failed to initialize correctly during boot.
Check the CompactFlash card or hard disk for errors. Reboot the device and verify the OS installation is intact. Replace storage media if corrupted.
Event ID: 200: Hardware watchdog timeout — the system watchdog triggered a reset due to an application or OS hang.
Identify and close the application causing the hang. Check CPU load and memory usage. Update or reinstall the offending software.
Event ID: 300: Ethernet communication failure — the network interface could not establish or maintain a connection.
Check Ethernet cable and switch port. Verify IP address configuration in Windows Network Settings. Replace cable or network adapter if hardware fault is confirmed.
Event ID: 400: Touchscreen calibration error — touch input is misaligned or unresponsive.
Run the touchscreen calibration utility from the Windows Control Panel. If unresponsive, check the touch controller connection internally. Replace the touchscreen overlay if calibration fails repeatedly.
Event ID: 500: Power supply undervoltage — the 24 V DC supply voltage dropped below the minimum operating threshold.
Measure the supply voltage at the power connector. Ensure the supply is rated for the Panel PC load. Replace or adjust the power supply unit.
Event ID: 600: Storage media error — read/write errors detected on the CompactFlash card or hard disk drive.
Back up data immediately. Run a disk check utility. Replace the CompactFlash card or HDD with a compatible unit and restore the OS image.
Event ID: 700: Fan failure or overtemperature warning — internal temperature exceeded safe operating limits or a cooling fan has stopped.
Check ambient temperature and ensure adequate ventilation around the panel. Clean any dust from ventilation slots. Replace the cooling fan if faulty.

Frequently Asked Questions

What is the supply voltage for the 6AV7605-1BE23-0CB1?

The unit operates on 24 V DC. Ensure the power supply is stable and within the specified tolerance range to avoid undervoltage faults.

What operating system does the SIMATIC Panel PC 670 use?

The 6AV7605-1BE23-0CB1 runs Microsoft Windows XP Professional or Windows XP Embedded, depending on the specific configuration ordered.

Is the 6AV7605-1BE23-0CB1 compatible with Siemens WinCC?

Yes, the SIMATIC Panel PC 670 is designed to run Siemens WinCC and other PC-based HMI and SCADA software packages.

What is the front panel protection rating of this Panel PC?

The front panel of the 6AV7605-1BE23-0CB1 is rated to IP65, providing protection against dust ingress and water jets.

What communication interfaces are available on this unit?

The unit provides Ethernet (RJ45), USB 2.0 ports, and serial COM (RS-232) interfaces for connectivity to PLCs, networks, and peripherals.

Troubleshooting

Display remains blank after power on

Check the 24 V DC supply voltage at the power connector. Verify the power LED status. Measure voltage at the internal power supply board.

Ensure the 24 V DC supply is within tolerance. If the supply is correct but the display remains blank, the internal power supply module or backlight inverter may be faulty and should be replaced.

Touchscreen does not respond to input

Attempt to control the system using a USB mouse or keyboard to determine if the OS is running. Check Device Manager for touchscreen controller errors.

Run the touchscreen calibration utility. If the controller is not recognized, check the internal ribbon cable connection. Replace the touchscreen overlay or controller board if hardware failure is confirmed.

System fails to boot or continuously restarts

Check the CompactFlash card or hard disk drive for physical damage or loose connection. Attempt to boot from an external USB device to isolate the storage media.

Replace the CompactFlash card with a compatible unit and restore the OS image using a Siemens recovery image. Ensure all internal connectors are firmly seated.

Ethernet connection not established

Check the Ethernet cable and verify the link LED on the RJ45 port is active. Open Windows Network Connections to check adapter status and IP configuration.

Replace the Ethernet cable and verify switch port functionality. If the adapter is not detected in Device Manager, reinstall the network driver or replace the Ethernet interface card.

System overheating or unexpected shutdowns

Monitor the internal temperature using a system diagnostic tool or BIOS hardware monitor. Check that ventilation slots are not obstructed and ambient temperature is within specification.

Clean ventilation slots and ensure the panel cutout provides adequate clearance. Verify the cooling fan is operational. If ambient temperature exceeds 50 °C, improve enclosure ventilation or add external cooling.

Condition	Repair, Used, Refurbished, New in box (sealed)