Siemens 6AV7260-2DR20-0BX0 SIMATIC IPC477C

Name: Siemens 6AV7260-2DR20-0BX0 SIMATIC IPC477C
Brand: Siemens
SKU: 6AV7260-2DR20-0BX0
Price: 1995.00 EUR
Availability: InStock

€ 1.995,00

Condition

Clear

SKU: 6AV7260-2DR20-0BX0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7260-2DR20-0BX0 is a panel PC belonging to the SIMATIC IPC477C series, a high-performance industrial PC platform developed by Siemens for demanding automation and visualization tasks. This unit integrates a widescreen multi-touch display with an embedded PC architecture, providing a combined HMI and computing solution in a single panel-mount device. It is designed for use in harsh industrial environments where reliability, longevity, and computing performance are essential.

The IPC477C features a 15.4-inch widescreen display with a projected capacitive (PCT) multi-touch interface, supporting up to 4 simultaneous touch points for intuitive operator interaction. The unit is built around an Intel Core i5 or i7 processor platform (depending on configuration), with DDR3 RAM and solid-state or hard disk drive storage options. It supports communication via Ethernet (RJ45), USB ports, and serial interfaces, and is compatible with PROFINET and standard industrial communication protocols. The enclosure provides IP65 protection on the front panel, making it resistant to dust and water ingress, and the unit is certified to CE and UL standards.

The SIMATIC IPC477C is widely deployed in machine tool control, automotive manufacturing, process automation, and factory automation environments where a combined visualization and control platform is required. Its compatibility with Siemens WinCC, STEP 7, and TIA Portal software makes it a natural fit for Siemens-based automation architectures. The robust construction and long-term availability of spare parts make it suitable for applications requiring extended operational lifecycles.

Technical Specifications

Display Size	15.4 inch (widescreen)
Touch Technology	Projected Capacitive (PCT) Multi-Touch, up to 4 touch points
Display Resolution	1280 x 800 px (WXGA)
Display Colors	16.7 million colors
Processor	Intel Core i5 (dual-core)
Operating Voltage	24 V DC
Power Consumption	Approx. 65 W (typical)
IP Protection Rating	IP65 (front panel)
Communication Interface	2x RJ45 Ethernet (10/100/1000 Mbit/s), 4x USB, 1x RS-232
Operating Temperature	0 °C to +50 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5% to 90% (non-condensing)
Mounting	Panel mounting (flush mount)
Certifications	CE, UL, cULus
Series/Product Family	SIMATIC IPC477C

Common Error Codes & System Events

Event ID: 100: Operating system startup failure or boot error detected during POST sequence.
Check storage drive integrity and connections. Verify BIOS settings. Replace storage drive if corrupted or failed.
Event ID: 101: RAM memory error detected during system initialization.
Reseat or replace RAM modules. Run memory diagnostics from BIOS. Ensure correct RAM type and capacity is installed.
Event ID: 200: Fan failure or thermal management warning; cooling fan not operating within specified speed range.
Inspect and clean the cooling fan. Replace the fan module if it is not spinning or is running below rated speed.
Event ID: 201: CPU or system overtemperature warning threshold exceeded.
Check ambient temperature and ventilation around the panel. Clean air filters and heat sinks. Verify fan operation.
Event ID: 300: Hard disk drive or SSD SMART error indicating imminent storage device failure.
Back up all data immediately. Replace the storage drive with a compatible Siemens-approved unit and restore the system image.
Event ID: 400: Ethernet interface communication failure or link-down condition detected.
Check Ethernet cable connections and switch port status. Verify network configuration settings in the operating system. Replace cable or NIC if hardware fault is confirmed.
Event ID: 500: 24 V DC supply undervoltage condition detected; input voltage below operational threshold.
Measure the 24 V DC supply at the power connector. Ensure the power supply unit is rated for the IPC load. Replace or adjust the power supply as necessary.
Event ID: 600: Touch screen controller error; touch input not responding or calibration lost.
Recalibrate the touch screen via the operating system control panel. If the issue persists, check the internal touch controller ribbon cable connection or replace the touch screen assembly.

Frequently Asked Questions

What is the input voltage for the SIMATIC IPC477C 6AV7260-2DR20-0BX0?

The unit operates on a 24 V DC supply voltage. Ensure the power source is stable and within the specified tolerance range to prevent system faults.

What operating systems are supported by this IPC?

The SIMATIC IPC477C supports Microsoft Windows 7 (32/64-bit) and Windows Embedded Standard 7, depending on the ordered configuration. Compatibility with Windows 10 may be available via Siemens upgrade options.

Is the 6AV7260-2DR20-0BX0 compatible with Siemens TIA Portal and WinCC?

Yes, this panel PC is fully compatible with Siemens TIA Portal and WinCC SCADA/HMI software, making it suitable for integration into Siemens-based automation systems.

What is the IP protection rating of this panel PC?

The front panel of the IPC477C achieves IP65 protection, providing complete dust-tightness and protection against low-pressure water jets. The rear enclosure has a lower protection rating.

Can the storage drive be replaced or upgraded in the field?

Yes, the IPC477C is designed to allow storage drive replacement. Siemens recommends using approved CFast cards, SSDs, or HDDs and restoring from a system image backup after replacement.

Troubleshooting

Display remains blank after power is applied

Check the 24 V DC supply voltage at the power connector using a multimeter. Verify that the power LED indicator is illuminated. Inspect internal fuse and power supply board.

Restore the 24 V DC supply to within specification. Replace the internal fuse if blown. If the backlight has failed, replace the display assembly or backlight inverter module.

Touch screen does not respond to input

Verify that the operating system has fully booted. Check Device Manager for touch controller errors. Inspect the ribbon cable connection between the touch panel and the controller board.

Recalibrate the touch screen through the OS control panel. Reseat the ribbon cable connector. If the touch controller is faulty, replace the touch screen assembly.

System fails to boot and displays a BIOS error or black screen with error text

Attempt to boot from an external USB drive to isolate whether the fault is with the internal storage drive or the operating system. Check BIOS for storage device detection.

Replace the internal storage drive with a compatible unit. Restore the operating system and application software from a verified system image backup.

Ethernet communication is not established

Check physical cable connections at both the IPC and the network switch. Verify link LEDs on the RJ45 port. Check IP address configuration and network adapter status in the OS.

Replace the Ethernet cable. Reconfigure the network adapter settings. If the onboard NIC is faulty, use a USB-to-Ethernet adapter as a temporary measure and arrange for hardware repair.

System overheating or unexpected shutdown due to high temperature

Monitor CPU and system temperatures using a diagnostic utility. Check that the ambient temperature is within the 0 to 50 degrees C operating range. Inspect cooling fan operation and air filter condition.

Clean or replace the air filter and heat sink. Ensure adequate ventilation around the panel cutout. Replace the cooling fan if it is not operating at rated speed. Reduce ambient temperature if possible.

Condition	Repair, Used, Refurbished, New in box (sealed)