Siemens 6AV7241-5BB07-0GA0 SIMATIC IPC277D

Name: Siemens 6AV7241-5BB07-0GA0 SIMATIC IPC277D
Brand: Siemens
SKU: 6AV7241-5BB07-0GA0
Price: 1811.00 EUR
Availability: InStock

€ 1.811,00

Condition

Clear

SKU: 6AV7241-5BB07-0GA0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7241-5BB07-0GA0 is a panel PC belonging to the SIMATIC IPC277D series, part of Siemens' industrial PC product line designed for demanding automation and process visualization environments. This unit is a 15-inch multi-touch panel PC that integrates computing power and HMI functionality into a single compact device. It is designed for direct panel mounting and operates within the SIMATIC HMI ecosystem.

The IPC277D features a 15-inch widescreen TFT display with a projected capacitive (PCT) multi-touch interface, supporting up to 4 simultaneous touch points. It is powered by an Intel Atom processor and runs Microsoft Windows Embedded Standard 7 or Windows 7 Ultimate, providing a full PC platform for SCADA and visualization software such as WinCC. The unit includes multiple communication interfaces including Ethernet (RJ45), USB ports, and optionally PROFIBUS or PROFINET, enabling seamless integration into existing automation networks. It carries an IP65 protection rating on the front panel, making it suitable for use in environments where dust and water ingress are a concern.

The SIMATIC IPC277D is widely deployed in manufacturing, automotive, food and beverage, pharmaceutical, and process industries where a robust, full-featured panel PC is required for machine-level or cell-level visualization. Its fanless design options and wide operating temperature range make it suitable for installation in control cabinets and on machine fronts where reliability and low maintenance are priorities. The device is compatible with standard Siemens automation software, making it a natural fit for plants already using SIMATIC S7 PLCs and TIA Portal engineering environments.

Technical Specifications

Display Size	15 inch
Display Type	TFT widescreen LCD
Touch Technology	Projected capacitive (PCT) multi-touch, up to 4 touch points
Input/Operating Voltage	24 V DC
Power Consumption	Approx. 60 W (typical)
IP Protection Rating (Front)	IP65
IP Protection Rating (Rear)	IP20
Communication Interfaces	2x RJ45 Ethernet (10/100/1000 Mbit/s), 4x USB 2.0
Operating System	Windows Embedded Standard 7 / Windows 7 Ultimate
Processor	Intel Atom E3827 (dual-core, 1.75 GHz)
RAM	2 GB DDR3L (expandable to 4 GB)
Storage	CFast card slot; optional HDD/SSD
Operating Temperature	0 °C to +50 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5 % to 90 % (non-condensing)
Mounting	Panel mounting (portrait or landscape)
Certifications	CE, UL, cULus

Common Error Codes & System Events

Event ID: 100: System startup error — the operating system failed to boot correctly, possibly due to a corrupted CFast card or storage device.
Check the CFast card for errors using a diagnostic tool. Re-image the CFast card with the correct OS image if corruption is detected.
Event ID: 1000: Application crash — a running application (e.g., WinCC Runtime) has terminated unexpectedly.
Review the Windows Event Viewer for detailed crash logs. Reinstall or repair the affected application. Check for memory or storage issues.
Event ID: 6008: Unexpected shutdown — the system was shut down uncleanly, possibly due to a power loss or hardware fault.
Verify the 24 V DC power supply stability. Check for voltage dips or interruptions. Inspect power connectors and UPS if applicable.
BIOS POST Error: Hardware component not detected during Power-On Self-Test, such as missing RAM or storage device.
Reseat RAM modules and CFast card. Verify all internal connections. Replace faulty hardware components as identified.
WinCC Runtime Error: WinCC Runtime fails to start or displays a configuration error, often due to a missing or incompatible project file.
Verify the WinCC project file integrity. Ensure the correct Runtime version is installed. Reload the project from a backup if necessary.
Network Connection Lost: Ethernet communication to PLC or SCADA system is interrupted, causing loss of process data on the display.
Check Ethernet cable connections and switch/router status. Verify IP address configuration and subnet settings. Test with a known-good cable.
Touchscreen Not Responding: The PCT touch interface does not register input, possibly due to a driver issue, contamination, or hardware fault.
Clean the screen surface. Restart the touch driver via Device Manager. If unresolved, recalibrate or replace the touch controller.
Temperature Warning: Internal temperature sensor reports overtemperature condition, which may cause system throttling or shutdown.
Check ambient temperature around the panel. Ensure ventilation slots are not blocked. Verify the cooling concept of the control cabinet meets specifications.

Frequently Asked Questions

What operating systems are supported by the SIMATIC IPC277D 6AV7241-5BB07-0GA0?

This unit supports Windows Embedded Standard 7 and Windows 7 Ultimate. It is not natively supplied with Windows 10, though Siemens offers upgrade paths for some IPC277D variants.

What is the front panel protection rating of this panel PC?

The front panel of the IPC277D carries an IP65 protection rating, making it resistant to dust ingress and low-pressure water jets. The rear of the unit is rated IP20.

Is this panel PC compatible with Siemens TIA Portal and WinCC?

Yes, the SIMATIC IPC277D is fully compatible with Siemens WinCC Runtime and can be engineered using TIA Portal. It is a standard platform for SIMATIC HMI visualization projects.

What communication interfaces are available on this unit?

The unit provides two RJ45 Gigabit Ethernet ports and four USB 2.0 ports as standard. Optional expansion modules can add PROFIBUS or additional interfaces depending on the configuration.

Can this panel PC be mounted in both portrait and landscape orientation?

Yes, the SIMATIC IPC277D supports both portrait and landscape panel mounting orientations, providing flexibility for different cabinet and machine front designs.

Troubleshooting

Display remains blank after power is applied

Measure the 24 V DC supply voltage at the power connector. Check that the voltage is within the specified tolerance (typically 19.2–28.8 V DC). Inspect internal fuses if accessible.

Correct any power supply issues. If the supply is confirmed good and the display remains blank, the internal power board or display backlight inverter may be faulty and require replacement.

Touchscreen registers incorrect touch positions or is unresponsive

Check for surface contamination such as moisture, grease, or conductive debris on the PCT screen. Verify touch driver status in Windows Device Manager.

Clean the screen with a dry, lint-free cloth. Restart the touch driver or reinstall it. If the problem persists, the touch controller board may need replacement.

System freezes or reboots unexpectedly during operation

Check the Windows Event Viewer for critical errors or blue screen (BSOD) dump files. Monitor the 24 V DC supply for voltage instability. Check internal temperature via BIOS or monitoring software.

Stabilize the power supply and ensure adequate cabinet ventilation. If software-related, repair or reinstall the OS image on the CFast card. Replace the CFast card if storage errors are detected.

Ethernet communication to PLC is lost intermittently

Inspect the Ethernet cable and connector for damage or poor seating. Check the network switch port status. Verify IP configuration and firewall settings within Windows.

Replace the Ethernet cable and reseat connectors. Assign a static IP address to avoid DHCP-related dropouts. Update the network adapter driver if an updated version is available.

WinCC Runtime does not start after system boot

Check the Windows Event Viewer for application errors related to WinCC. Verify that the WinCC Runtime license is present and valid. Confirm that the project file path is correct and accessible.

Restore the WinCC Runtime license using the Siemens Automation License Manager. Reload the project from a backup. Reinstall WinCC Runtime if the installation is found to be corrupted.

Condition	Repair, Used, Refurbished, New in box (sealed)