Siemens 6AV3617-1JC20-0AX1 OP17

Name: Siemens 6AV3617-1JC20-0AX1 OP17
Brand: Siemens
SKU: 6AV3617-1JC20-0AX1
Availability: InStock

Price range: € 662,00 through € 820,00

Condition

Clear

SKU: 6AV3617-1JC20-0AX1 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens OP17 (part number 6AV3617-1JC20-0AX1) is a compact operator panel belonging to the SIMATIC HMI family. It is designed for machine-level human-machine interface applications, providing text-based display and keyboard input for process visualization and control. The OP17 is a member of the SIMATIC OP series, intended for use with Siemens SIMATIC S5 and S7 programmable logic controllers.

The 6AV3617-1JC20-0AX1 features a 4-line LCD text display capable of showing up to 20 characters per line, with a membrane keypad for operator input including function keys and system keys. It supports multiple communication interfaces including MPI, PROFIBUS-DP, and point-to-point serial connections, enabling flexible integration into existing automation networks. The panel operates on 24 V DC supply voltage and is designed for panel mounting with a protection rating of IP65 on the front face. Configuration is performed using the ProTool software package.

The OP17 is widely used in manufacturing, packaging, and process automation environments where a cost-effective, robust text-based operator interface is required. It is suitable for machine tools, conveyor systems, and general industrial machinery where operators need to monitor process values, acknowledge alarms, and adjust setpoints. Its compact form factor and panel-flush mounting make it appropriate for integration into control cabinets and machine panels with limited space.

Technical Specifications

Display Type	LCD text display
Display Lines	4 lines
Characters per Line	20 characters
Keyboard	Membrane keypad with function keys and system keys
Input Voltage	24 V DC
Communication Interface	MPI, PROFIBUS-DP, RS-232/RS-422/RS-485 (point-to-point)
IP Rating (Front)	IP65
IP Rating (Rear)	IP20
Operating Temperature	0 °C to +50 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	10% to 90% (non-condensing)
Mounting	Panel mounting, flush
Certifications	CE, UL
Configuration Software	ProTool

Common Error Codes & System Events

System Error 1: Communication error between OP17 and connected PLC. The panel cannot establish or maintain a connection to the controller.
Check communication cable connections and termination resistors. Verify MPI or PROFIBUS address settings on both the OP17 and the PLC. Ensure baud rate settings match on all network nodes.
System Error 2: Project data error or missing configuration. The panel has detected corrupted or absent project data in memory.
Re-download the project from ProTool to the OP17. Check the transfer cable and connection during download. If the error persists, perform a memory reset and re-transfer the project.
System Error 6: Internal memory error detected on the operator panel.
Perform a complete memory reset via the panel's system menu. Re-download the project configuration. If the fault recurs, the internal memory may be faulty and the unit should be repaired or replaced.
System Error 10: Timeout error during communication with the PLC. The OP17 did not receive a response from the controller within the expected time window.
Check network cabling for breaks or poor connections. Verify PLC is in RUN mode and responding on the network. Reduce network load or increase the communication timeout setting in the project configuration.
System Error 14: Tag or variable address not found in the PLC. The OP17 is attempting to access a data address that does not exist or is out of range in the connected controller.
Review the project configuration in ProTool and verify all variable addresses match the actual PLC data block and memory addresses. Correct any mismatched addresses and re-download the project.
System Error 20: Transfer mode active. The panel is waiting for a project download and normal operation is suspended.
Initiate a project transfer from ProTool on the connected PC, or exit transfer mode via the panel keypad if no download is intended. Ensure the correct COM port and transfer settings are selected in ProTool.
System Error 40: Operating system error or firmware fault detected on the OP17.
Cycle power to the panel. If the error persists, update or re-flash the panel firmware using the appropriate Siemens tool. Contact Siemens technical support if the fault cannot be cleared.

Frequently Asked Questions

Which PLCs are compatible with the Siemens OP17 (6AV3617-1JC20-0AX1)?

The OP17 is compatible with Siemens SIMATIC S7-200, S7-300, S7-400, and S5 series PLCs via MPI or PROFIBUS-DP interfaces. Point-to-point serial connections also allow integration with third-party controllers supported by ProTool drivers.

What software is used to configure and program the OP17?

The OP17 is configured using Siemens ProTool software. Projects are created on a PC and transferred to the panel via a serial cable connection.

What is the supply voltage for the 6AV3617-1JC20-0AX1?

The OP17 operates on a 24 V DC supply voltage. Ensure the power supply is within the specified tolerance range for reliable operation.

What is the front panel protection rating of the OP17?

The front face of the OP17 carries an IP65 protection rating, making it resistant to dust ingress and low-pressure water jets, suitable for industrial panel mounting environments.

Can the OP17 display graphics or only text?

The OP17 is a text-based operator panel and does not support graphical display. It shows alphanumeric characters across 4 lines of 20 characters each.

Troubleshooting

Display remains blank after power on

Check the 24 V DC supply voltage at the power connector on the rear of the panel. Verify the supply is within tolerance and the connector is fully seated. Inspect for any visible damage to the unit.

Restore correct 24 V DC supply voltage. If the supply is confirmed correct and the display remains blank, the internal power supply or display module may be faulty and the unit should be sent for repair or replacement.

OP17 shows continuous communication error with PLC

Verify the MPI or PROFIBUS-DP cable is correctly connected and terminated at both ends. Check that the OP17 node address does not conflict with other devices on the network. Confirm the PLC is powered and in RUN or STOP mode.

Replace or reseat the communication cable. Correct any duplicate node addresses in the network configuration. Ensure termination resistors are installed only at the physical ends of the bus. Re-download the project if communication parameters have changed.

Project download from ProTool fails or times out

Check the serial transfer cable connection between the PC and the OP17. Verify the correct COM port is selected in ProTool and that the baud rate matches the panel settings. Confirm the OP17 is in transfer mode.

Use a known-good Siemens transfer cable. Set the OP17 to transfer mode via the system menu before initiating the download. Try a lower baud rate if transfer errors persist. Ensure no other application is using the selected COM port on the PC.

Operator keypad keys not responding or intermittently responding

Inspect the membrane keypad surface for physical damage, contamination, or wear. Check for any debris beneath the keypad overlay. Test multiple keys to determine if the fault is isolated to specific keys or affects the entire keypad.

Clean the keypad surface with a dry cloth. If specific keys are permanently unresponsive due to membrane wear or damage, the keypad membrane assembly should be replaced. For units with widespread key failure, internal PCB inspection may be required.

Alarm messages not displaying correctly or not updating

Verify that the alarm tag addresses in the ProTool project match the actual PLC memory addresses. Check that the PLC program is correctly writing alarm bit states. Confirm communication between the OP17 and PLC is stable.

Correct any mismatched alarm variable addresses in the ProTool project and re-download. Ensure the PLC program logic correctly sets and resets alarm bits. If communication is intermittent, resolve network issues first before re-testing alarm display functionality.

Condition	Repair, Used, Refurbished, New in box (sealed)