Siemens 6AV3617-1JC00-0AX1 OP17

Name: Siemens 6AV3617-1JC00-0AX1 OP17
Brand: Siemens
SKU: 6AV3617-1JC00-0AX1
Availability: InStock

Price range: € 662,00 through € 799,00

Condition

Clear

SKU: 6AV3617-1JC00-0AX1 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens OP17 (part number 6AV3617-1JC00-0AX1) is a compact operator panel belonging to the SIMATIC HMI family. It is designed for machine-level human-machine interface applications, providing operators with a text-based display and keypad input for monitoring and controlling industrial processes. The OP17 is a member of the OP series of operator panels, which are widely used in conjunction with Siemens SIMATIC PLCs.

The 6AV3617-1JC00-0AX1 features a 4-line LCD text display capable of showing up to 20 characters per line, allowing clear presentation of process values, messages, and status information. It is equipped with a membrane keypad including function keys, system keys, and numeric input keys for direct operator interaction. The panel communicates via the MPI (Multi-Point Interface) and PROFIBUS DP protocols, enabling seamless integration with S7-200, S7-300, and S7-400 PLCs. Configuration is performed using Siemens ProTool software, and the unit operates on a 24 V DC supply.

The OP17 is commonly deployed in manufacturing, packaging, material handling, and process automation environments where a cost-effective, robust text-based HMI is required. Its compact form factor and panel-mount design make it suitable for integration into control cabinets and machine panels with limited space. The unit is well-suited for applications requiring straightforward process visualization, alarm management, and parameter input without the need for graphical display capabilities.

Technical Specifications

Display Type	LCD text display
Display Lines	4 lines
Characters per Line	20 characters
Input/Operating Voltage	24 V DC
Communication Interface	MPI, PROFIBUS DP
Operating Temperature	0 °C to +50 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	10% to 90% (non-condensing)
IP Protection Rating (Front)	IP65
IP Protection Rating (Rear)	IP20
Mounting	Panel mount
Configuration Software	Siemens ProTool
PLC Compatibility	SIMATIC S7-200, S7-300, S7-400
Certifications	CE, UL

Common Error Codes & System Events

Event ID: 40000: Communication error between the OP17 and the connected PLC. The panel cannot establish or maintain a connection to the controller.
Check MPI or PROFIBUS DP cable connections and termination resistors. Verify the PLC address and baud rate settings match the OP17 configuration. Ensure the PLC is powered and in RUN mode.
Event ID: 40001: Timeout error on the MPI or PROFIBUS DP bus. The OP17 has lost communication with the PLC within the configured timeout period.
Inspect bus cabling for breaks or poor connections. Verify bus termination at both ends of the network. Check for address conflicts on the bus.
Event ID: 10000: Configuration data error. The project data stored in the OP17 is corrupted or incompatible with the current firmware version.
Re-download the project configuration from ProTool to the OP17. Ensure the ProTool project version is compatible with the panel firmware.
Event ID: 10001: No project loaded. The OP17 has started without a valid configuration project in memory.
Transfer a valid ProTool project to the OP17 via the MPI interface or serial download cable.
Event ID: 20000: Operating voltage out of range. The 24 V DC supply voltage has dropped below or exceeded the permissible limits.
Measure the supply voltage at the OP17 power connector. Ensure the power supply provides a stable 24 V DC within the specified tolerance range.
Event ID: 30000: Internal memory error. A fault has been detected in the panel's internal RAM or flash memory.
Perform a factory reset of the OP17 and re-download the project. If the error persists, the panel may require repair or replacement of internal memory components.
Event ID: 50000: Tag update error. One or more process tags cannot be read from or written to the connected PLC.
Verify that the PLC data block addresses referenced in the ProTool project exist and are accessible. Check PLC program for correct data block definitions.

Frequently Asked Questions

What communication protocols does the OP17 (6AV3617-1JC00-0AX1) support?

The OP17 supports MPI (Multi-Point Interface) and PROFIBUS DP for communication with Siemens SIMATIC PLCs including the S7-200, S7-300, and S7-400 series.

What software is used to configure the Siemens OP17?

The OP17 is configured using Siemens ProTool configuration software. The project is then downloaded to the panel via the MPI interface or a serial download cable.

What is the supply voltage for the 6AV3617-1JC00-0AX1?

The OP17 operates on a 24 V DC supply voltage.

What is the front panel protection rating of the OP17?

The OP17 has an IP65 protection rating on the front panel, making it resistant to dust and water jets, suitable for installation in control cabinet doors exposed to industrial environments.

Can the OP17 display graphical content?

No, the OP17 is a text-based operator panel with a 4-line by 20-character LCD display. It does not support graphical or bitmap image display; it is intended for alphanumeric text and status messages only.

Troubleshooting

Display remains blank after power on

Check the 24 V DC supply voltage at the power connector. Verify the internal fuse if accessible. Inspect the display contrast setting, which may have been set to minimum.

Ensure the power supply is providing stable 24 V DC. Adjust the display contrast using the contrast control keys during startup. If the display remains blank with correct voltage, the panel may require internal repair or display replacement.

OP17 shows persistent communication error and cannot connect to PLC

Verify MPI or PROFIBUS DP cable integrity and connector seating. Check that the bus termination resistors are correctly installed at both ends of the network. Confirm the PLC address and baud rate in the ProTool project match the physical PLC settings.

Replace or re-seat the communication cable. Correct address and baud rate settings in the ProTool project and re-download. Enable bus termination on the OP17 if it is at the end of the bus segment.

Keypad buttons are unresponsive or intermittently fail

Inspect the membrane keypad for physical damage, contamination, or wear. Test individual keys to identify whether the fault is isolated to specific keys or affects the entire keypad.

Clean the keypad surface with a dry cloth. If individual keys are mechanically damaged or the membrane is worn through, the keypad membrane assembly will need to be replaced as a spare part.

Project download from ProTool fails or is interrupted

Check the serial or MPI download cable connection between the PC and the OP17. Verify that the correct COM port and transfer settings are selected in ProTool. Ensure the OP17 is in transfer mode before initiating the download.

Replace the download cable if damaged. Set the OP17 to transfer mode by navigating to the system menu. Confirm ProTool communication settings match the panel interface and retry the download.

Alarm messages are not displayed on the OP17

Verify that alarm tags in the ProTool project are correctly mapped to the corresponding PLC data addresses. Check that the PLC program is writing the correct bit values to trigger alarms.

Review and correct the alarm tag configuration in ProTool, ensuring data block addresses and bit offsets match the PLC program. Re-download the updated project to the OP17 and test alarm triggering from the PLC.

Condition	Repair, Used, Refurbished, New in box (sealed)