Siemens 6ES7155-6AU01-0CN0
Price range: € 149,00 through € 212,01
Siemens repareren bij Cirele is:
• Duidelijke tarieven zonder onverwachte kosten
• Betaling pas na geslaagde reparatie
• Proactieve vervanging van tijdgevoelige onderdelen
• Gedetailleerd test- en reparatierapport wordt verstrekt
• 2 jaar garantie op alle reparaties
• Langdurige ondersteuning tot einde levensduur.
Siemens 6ES7155-6AU01-0CN0 – SIMATIC ET 200SP PROFINET Interface Module
The Siemens 6ES7155-6AU01-0CN0 is a high-performance interface module for the SIMATIC ET 200SP distributed I/O system. It provides a dual-port PROFINET interface for flexible and redundant communication in industrial automation systems.
- Manufacturer: Siemens
- Model: 6ES7155-6AU01-0CN0
- Series: SIMATIC ET 200SP
- Type: PROFINET Interface Module (IM 155-6 PN/2 HF)
- Number of Ports: 2 (Dual-Port Interface)
- Redundancy: S2 Redundancy for increased reliability
- Supports Isochronous Mode: Yes, with a cycle time of 0.25 ms
- Module Capacity: Supports up to 64 I/O modules and 16 ET 200AL modules
- Supply Voltage: 24 V DC (permissible range: 19.2 V to 28.8 V)
- Current Consumption: Maximum of 700 mA
- Inrush Current: Up to 4.5 A
- Power Loss: Approximately 2.4 W
- Dimensions (W x H x D): 50 mm x 117 mm x 74 mm
- Weight: Approximately 120 grams (excluding BusAdapter)
- Operating Temperature Range: -30°C to +60°C (horizontal installation); -30°C to +50°C (vertical installation)
Features:
- Dual-port PROFINET interface for flexible network configurations
- Redundancy support for enhanced system reliability and uptime
- High module capacity, allowing for significant system expansion
- Supports isochronous mode for time-critical applications
- Allows for multi-hotswap capability, ensuring system uptime during module replacement
Compliance:
- RoHS Compliant
- WEEE Take-Back Obligation
Product Lifecycle:
- Phase-Out Announcement: October 1, 2026
- Successor Model: 6ES7155-6MU01-0CN0
| Condition |
|---|
Common defects
Common defects on a Siemens 6ES7155-6AU01-0CN0 are:
Power Supply & Hardware
- No power / PLC not starting
- Blown fuses or power components
- Faulty internal power supply module
- Overheating due to poor cooling or fan failure
- Damaged capacitors or power circuits
Input & Output (I/O) Failures
- Digital inputs not responding
- Analog inputs showing incorrect values
- Digital outputs not switching or stuck
- Burnt or damaged relay / transistor outputs
- I/O modules not recognized or defective
Communication Problems
- No communication with HMI or SCADA
- Network issues (Profibus, Profinet, Modbus, Ethernet/IP, CAN, etc.)
- Serial communication (RS232/RS485) failure
- Fieldbus module malfunction
- Outdated or incompatible firmware causing errors
Memory & Software Issues
- Lost parameters or corrupted programs (EEPROM/Flash failure)
- PLC loses program after power-down
- Firmware corruption or software errors
- Faulty or empty backup battery
- Errors during upload/download of program
CPU & Processing Errors
- PLC freezes or resets unexpectedly
- CPU not responding to commands
- Error messages during startup or runtime
- Watchdog timer faults or internal CPU errors
- Synchronization issues with other modules
Mechanical & Physical Damage
- Broken PCB tracks or connectors
- Corrosion due to moisture or chemicals
- Contamination from dust, oil, or dirt
- Burnt components or discolored boards
- Poor solder joints (dry joints)
Other Failures
- Faulty display or diagnostic LEDs
- Non-functional buttons or keypad
- Expansion modules not detected
- Defective internal clock or timers
- EMI/RFI noise due to damaged filters
Related products
-
Siemens Simatic ET200 6ES7134-6JF00-0CA1
€ 269,00Siemens repair at Cirele is:
• Clear pricing with no surprises
• Payment only after successful repair
• Proactive replacement of time-sensitive components
• Detailed testing and repair report provided
• 2-year warranty on all repairs
• Long-term support until end of life -
Siemens Simatic S5 6GF1710-3AA
Siemens repair at Cirele is:
• Clear pricing with no surprises
• Payment only after successful repair
• Proactive replacement of time-sensitive components
• Detailed testing and repair report provided
• 2-year warranty on all repairs
• Long-term support until end of life -
Siemens Simatic S7 6GK7343-5FA01-0XE0
Siemens repair at Cirele is:
• Clear pricing with no surprises
• Payment only after successful repair
• Proactive replacement of time-sensitive components
• Detailed testing and repair report provided
• 2-year warranty on all repairs
• Long-term support until end of life