Mitsubishi QC12B
€ 9,00
Mitsubishi repareren bij Cirele is:
• Duidelijke tarieven zonder onverwachte kosten
• Betaling pas na geslaagde reparatie
• Proactieve vervanging van tijdgevoelige onderdelen
• Gedetailleerd test- en reparatierapport wordt verstrekt
• 2 jaar garantie op alle reparaties
• Langdurige ondersteuning tot einde levensduur.
Mitsubishi QC12B – Base Unit (Backplane)
The Mitsubishi QC12B is a base unit (backplane) from the MELSEC System Q series, designed to accommodate up to 12 modules including CPU, power supply, I/O, and communication modules. It serves as the structural and electrical backbone of a modular PLC system, ensuring stable integration and signal distribution.
- Manufacturer: Mitsubishi Electric
- Model: QC12B
- Series: MELSEC System Q
- Type: Base Unit / Backplane
- Number of Slots: 12 slots
- Supported Modules: CPU, power supply, I/O, communication, and special function modules
- Power Distribution: Through internal system bus
- Mounting: Panel or DIN rail mounting
- Structure: Rigid frame with guided rails for module installation
- Dimensions: Approx. 420 x 120 x 90 mm (W x H x D)
- Weight: Approx. 1.3 kg
- Operating Temperature: 0°C to +55°C
- Compatibility: All System Q standard modules
- Compliance: CE, UL, RoHS
The QC12B backplane enables scalable and flexible configuration of Mitsubishi System Q PLCs, making it suitable for large and complex control systems requiring up to 12 modules.
| Condition |
|---|
Common defects
Common defects on a Mitsubishi QC12B are:
Power Supply & Hardware
- No power / PLC not starting
- Blown fuses or power components
- Faulty internal power supply module
- Overheating due to poor cooling or fan failure
- Damaged capacitors or power circuits
Input & Output (I/O) Failures
- Digital inputs not responding
- Analog inputs showing incorrect values
- Digital outputs not switching or stuck
- Burnt or damaged relay / transistor outputs
- I/O modules not recognized or defective
Communication Problems
- No communication with HMI or SCADA
- Network issues (Profibus, Profinet, Modbus, Ethernet/IP, CAN, etc.)
- Serial communication (RS232/RS485) failure
- Fieldbus module malfunction
- Outdated or incompatible firmware causing errors
Memory & Software Issues
- Lost parameters or corrupted programs (EEPROM/Flash failure)
- PLC loses program after power-down
- Firmware corruption or software errors
- Faulty or empty backup battery
- Errors during upload/download of program
CPU & Processing Errors
- PLC freezes or resets unexpectedly
- CPU not responding to commands
- Error messages during startup or runtime
- Watchdog timer faults or internal CPU errors
- Synchronization issues with other modules
Mechanical & Physical Damage
- Broken PCB tracks or connectors
- Corrosion due to moisture or chemicals
- Contamination from dust, oil, or dirt
- Burnt components or discolored boards
- Poor solder joints (dry joints)
Other Failures
- Faulty display or diagnostic LEDs
- Non-functional buttons or keypad
- Expansion modules not detected
- Defective internal clock or timers
- EMI/RFI noise due to damaged filters
Related products
-
Siemens Simatic S7 6ES7405-0KA02-0AA0
Repairing Siemens at Cirele is:
– Clear rates with no unexpected costs
– Payment only after successful repair
– Proactive replacement of time-sensitive parts
– Detailed test and repair report is provided
– 2-year warranty on all repairs
– Long-term support until end of life.€ 419,00 -
Siemens Simatic S5 6ES5460-4UA12
€ 279,00Repairing Siemens at Cirele is:
– Clear rates with no unexpected costs
– Payment only after successful repair
– Proactive replacement of time-sensitive parts
– Detailed test and repair report is provided
– 2-year warranty on all repairs
– Long-term support until end of life. -
Siemens Simatic ET200 6ES7134-6JF00-0CA1
€ 269,00Siemens repair at Cirele is:
• Clear pricing with no surprises
• Payment only after successful repair
• Proactive replacement of time-sensitive components
• Detailed testing and repair report provided
• 2-year warranty on all repairs
• Long-term support until end of life