Siemens 6AG2647-0AH11-1AX0 SIPLUS HMI KP300 Basic

Name: Siemens 6AG2647-0AH11-1AX0 SIPLUS HMI KP300 Basic
Brand: Siemens
SKU: 6AG2647-0AH11-1AX0
Price: 341.00 EUR
Availability: InStock

€ 341,00

Condition

Clear

SKU: 6AG2647-0AH11-1AX0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens SIPLUS HMI 6AG2647-0AH11-1AX0 is a ruggedized variant of the SIMATIC HMI KP300 Basic Mono PN panel, belonging to the SIPLUS extreme product line designed for use in harsh environmental conditions. This unit is part of the Basic Panel family and provides a compact key-based operator interface for straightforward machine-level HMI tasks. The SIPLUS designation indicates enhanced tolerance for extended temperature ranges, condensation, and corrosive atmospheres compared to the standard SIMATIC version.

The KP300 Basic Mono PN features a 3-inch monochrome STN display with a resolution of 240 x 80 pixels and is operated exclusively via physical function keys, with no touch functionality. It communicates via PROFINET (Ethernet), making it compatible with S7-1200 and S7-1500 controllers as well as other PROFINET-capable PLCs. The panel is configured using WinCC Basic (TIA Portal) and supports a limited tag count suitable for simple HMI applications. It operates on 24 V DC supply voltage and carries an IP65 protection rating on the front face for panel-mount installations.

This SIPLUS panel is typically deployed in industrial environments where standard HMI panels would be exposed to conditions exceeding normal operating limits, such as chemical processing plants, outdoor enclosures, food and beverage facilities, and marine or offshore applications. The extended robustness makes it suitable for machinery subject to temperature fluctuations, humidity, and airborne contaminants. Its compact form factor and key-only operation make it well suited for simple control tasks requiring reliable operator interaction under demanding conditions.

Technical Specifications

Display Size	3 inch
Display Type	Monochrome STN LCD
Display Resolution	240 x 80 pixels
Touch Technology	None (key-only operation)
Number of Function Keys	4 function keys + system keys
Input/Operating Voltage	24 V DC
Communication Interface	PROFINET (1x RJ45 Ethernet)
IP Protection Rating (Front)	IP65
IP Protection Rating (Rear)	IP20
Operating Temperature	-25 °C to +60 °C (SIPLUS extended range)
Storage Temperature	-40 °C to +70 °C
Relative Humidity	5 % to 95 % (with condensation, SIPLUS)
Mounting	Panel mounting
Certifications	CE, UL, cULus
Series/Product Family	SIPLUS extreme / SIMATIC HMI Basic Panels

Common Error Codes & System Events

Event ID: 10000: Communication error between HMI panel and PLC. The configured connection to the controller cannot be established or has been lost.
Check PROFINET cable and RJ45 connector integrity. Verify IP address configuration on both the panel and PLC. Ensure the PLC is in RUN mode and the network switch or router is functioning correctly.
Event ID: 10001: Connection to PLC interrupted during runtime. The panel lost communication with the configured controller.
Check network cabling and switch status. Verify PLC is powered and in RUN mode. Review PROFINET device name and IP settings in TIA Portal for consistency.
Event ID: 20000: Tag read error. The HMI was unable to read a configured tag from the PLC.
Verify the tag address exists in the PLC program and has not been deleted or renamed. Re-download the HMI project after correcting tag assignments in TIA Portal.
Event ID: 20001: Tag write error. The HMI was unable to write a value to a configured PLC tag.
Check that the target PLC data block or memory area is not write-protected. Confirm the tag data type matches between HMI configuration and PLC program.
Event ID: 40000: Project download error. A fault occurred during project transfer from the engineering PC to the HMI panel.
Ensure the panel is in transfer mode. Verify the Ethernet connection between the PC and panel. Check that the TIA Portal version is compatible with the panel firmware version.
Event ID: 50000: Firmware update error. The firmware update process was interrupted or failed to complete.
Restart the panel and attempt the firmware update again using the correct firmware package for the KP300 Basic PN. Ensure stable power supply during the update process.
Event ID: 60000: Internal device error. A hardware or system-level fault has been detected within the HMI panel.
Perform a factory reset via the panel's Start Center. If the error persists after reset and re-download of the project, the unit may require repair or replacement.

Frequently Asked Questions

What PLC families are compatible with the SIPLUS HMI 6AG2647-0AH11-1AX0?

This panel communicates via PROFINET and is compatible with Siemens S7-1200 and S7-1500 PLCs, as well as other PROFINET-capable controllers supported by WinCC Basic in TIA Portal.

What software is required to configure this HMI panel?

The panel is configured using WinCC Basic, which is included with TIA Portal. A compatible version of TIA Portal must be used that supports the KP300 Basic PN panel type.

What makes the SIPLUS version different from the standard SIMATIC KP300 Basic PN?

The SIPLUS variant offers extended environmental tolerance, including a wider operating temperature range down to -25 °C, resistance to condensation, and suitability for corrosive atmospheres, making it suitable for harsh industrial environments where the standard panel would not be rated.

Does this panel support touch input?

No, the KP300 Basic Mono PN operates exclusively via physical function keys and system keys. It does not have a touchscreen.

What is the supply voltage for this panel?

The panel requires a 24 V DC supply voltage for operation.

Troubleshooting

Display remains blank after power on

Check the 24 V DC supply voltage at the panel's power connector. Measure actual voltage under load to rule out supply issues. Inspect the connector for correct polarity and secure connection.

Correct any wiring errors or supply voltage deviations. If supply voltage is confirmed correct and the display remains blank, the internal power supply or display unit may be faulty and the panel should be sent for repair.

Panel cannot establish PROFINET connection to PLC

Verify the IP address and PROFINET device name assigned to the panel in TIA Portal match the physical panel settings accessible via the Start Center. Check the Ethernet cable and any intermediate network devices.

Correct IP address or device name mismatches in TIA Portal and re-download the project. Replace the Ethernet cable if damaged. Ensure the PLC is in RUN mode and its PROFINET interface is active.

HMI project cannot be downloaded from TIA Portal

Confirm the panel is set to Transfer mode via the Start Center menu. Check that the PC and panel are on the same network subnet and that no firewall is blocking the connection.

Set the panel to Transfer mode before initiating the download. Adjust PC network settings or firewall rules as needed. Ensure the TIA Portal version and panel firmware version are compatible.

Function keys do not respond during runtime

Check whether the panel is in runtime mode and the project has been successfully downloaded. Verify that key events are correctly configured and linked to actions in the WinCC Basic project.

Re-download the HMI project after verifying key assignments in TIA Portal. If keys remain unresponsive after a confirmed successful download, the keypad membrane or internal PCB may be defective and require hardware repair.

Panel repeatedly restarts or enters an error loop after power on

This may indicate a corrupted HMI project or a firmware issue. Attempt to access the Start Center during startup by pressing the appropriate key combination to interrupt normal boot.

Perform a factory reset from the Start Center and re-download the HMI project. If the issue persists, update the panel firmware to the latest compatible version using the Siemens firmware update tool.

Condition	Repair, Used, Refurbished, New in box (sealed)