Siemens 6AV7612-0AF22-0CJ0 SIMATIC Panel PC 670

Name: Siemens 6AV7612-0AF22-0CJ0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7612-0AF22-0CJ0
Price: 2007.00 EUR
Availability: InStock

€ 2.007,00

Condition

Clear

SKU: 6AV7612-0AF22-0CJ0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7612-0AF22-0CJ0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel PC designed for demanding human-machine interface applications, combining a built-in display with a full PC architecture running a Windows-based operating system. This unit is intended for use as a high-performance operator station in industrial automation environments.

The 6AV7612-0AF22-0CJ0 features a 12.1-inch TFT color display with a resolution of 800 x 600 pixels (SVGA) and resistive touch functionality. It is equipped with an Intel Celeron processor and supports standard PC interfaces including USB, serial (RS-232), and Ethernet (RJ45) for integration with SIMATIC S7 controllers and other automation systems via PROFINET or Industrial Ethernet. The unit is designed for front-panel mounting with an IP65 protection rating on the front face, making it suitable for installation in control cabinet doors. It operates on a 24 V DC supply and is built to withstand industrial environmental conditions including vibration and temperature variations.

The SIMATIC Panel PC 670 is widely used in the automotive, food and beverage, pharmaceutical, and machine tool industries as an operator interface and visualization station. Its PC-based architecture allows it to run SIMATIC WinCC, WinCC flexible, or third-party SCADA software, making it suitable for complex process visualization, data logging, and recipe management tasks. The combination of a robust industrial housing and standard PC expandability makes it appropriate for applications requiring both rugged hardware and flexible software integration.

Technical Specifications

Display Size	12.1 inch
Display Resolution	800 x 600 pixels (SVGA)
Display Type	TFT Color LCD
Touch Technology	Resistive Touch
Input Voltage	24 V DC
Voltage Range	19.2 V DC to 28.8 V DC
IP Protection Rating (Front)	IP65
IP Protection Rating (Rear)	IP20
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 60 °C
Relative Humidity	5% to 90% (non-condensing)
Communication Interface	Ethernet (RJ45), USB, RS-232 (COM)
Mounting	Front panel mounting
Operating System	Windows XP Embedded
Certifications	CE, UL, cUL

Common Error Codes & System Events

Event ID: 100: Operating system startup failure or boot error detected during POST sequence.
Check hard disk or CompactFlash card integrity. Verify BIOS settings and reseat storage media. Replace storage device if corrupted.
Event ID: 200: Watchdog timeout triggered, indicating the application software stopped responding within the defined monitoring interval.
Restart the Panel PC. Check the running application for software hangs or infinite loops. Update or reinstall the HMI application software.
Event ID: 300: Fan failure or thermal warning detected; internal temperature has exceeded the defined threshold.
Check and clean the ventilation slots. Verify ambient temperature is within specification. Replace the internal cooling fan if faulty.
Event ID: 400: Communication loss to the PLC or controller over Industrial Ethernet or PROFINET.
Check Ethernet cable connections and network switch. Verify IP address configuration and PLC communication settings in WinCC or WinCC flexible.
Event ID: 500: Touchscreen calibration error or touch input not responding correctly.
Recalibrate the touchscreen via the Windows control panel or SIMATIC HMI calibration utility. Clean the touch surface and check for physical damage.
Event ID: 600: Power supply undervoltage detected; supply voltage has dropped below the minimum operating threshold of 19.2 V DC.
Measure the 24 V DC supply at the input connector. Check the power supply unit output and wiring. Replace or adjust the power supply as needed.
Event ID: 700: Hard disk or CompactFlash storage device read/write error detected.
Run a disk check utility to identify bad sectors. Back up data and replace the storage device. Reinstall the operating system and HMI application.

Frequently Asked Questions

What operating system does the 6AV7612-0AF22-0CJ0 run?

This Panel PC runs Windows XP Embedded, which is pre-installed and configured for industrial HMI use with SIMATIC software.

What HMI software is compatible with this Panel PC?

The unit is compatible with Siemens SIMATIC WinCC and WinCC flexible runtime software, as well as third-party SCADA and visualization applications that support Windows XP Embedded.

What is the input voltage for this Panel PC?

The 6AV7612-0AF22-0CJ0 operates on a 24 V DC supply with an acceptable range of 19.2 V DC to 28.8 V DC.

What is the front panel protection rating of this unit?

The front panel of this Panel PC carries an IP65 protection rating, making it resistant to dust ingress and water jets, suitable for installation in control cabinet doors.

Can this Panel PC communicate with SIMATIC S7 PLCs?

Yes, the unit supports communication with SIMATIC S7-300 and S7-400 PLCs via Industrial Ethernet using standard SIMATIC communication drivers available in WinCC or WinCC flexible.

Troubleshooting

Panel PC does not boot and display remains blank after power on

Check the 24 V DC supply voltage at the input connector. Verify the power LED status. Attempt to connect an external monitor via the VGA port to determine if the issue is with the display or the PC itself.

If supply voltage is correct and external monitor shows output, replace the internal display or backlight inverter. If no output on external monitor, check and replace the CompactFlash or hard disk storage device, or service the mainboard.

Touchscreen does not respond or registers incorrect touch positions

Determine if the issue is a calibration problem or a hardware failure by observing whether any touch input is registered at all. Check for physical damage or contamination on the touch surface.

Recalibrate the touchscreen using the SIMATIC calibration tool or Windows Tablet PC settings. If calibration fails, clean the touch surface thoroughly. If the problem persists, replace the touchscreen overlay assembly.

Communication with PLC is lost intermittently or permanently

Check the Ethernet cable and RJ45 connector for damage or poor contact. Verify the IP address settings on both the Panel PC and the PLC. Use the Windows network diagnostics or ping command to test connectivity.

Replace the Ethernet cable if damaged. Reconfigure the IP address settings in the WinCC or WinCC flexible project. Check and update the Ethernet adapter driver if necessary.

Panel PC runs slowly or HMI application freezes

Check CPU and memory utilization via Windows Task Manager. Identify any background processes consuming excessive resources. Check available storage space on the system drive.

Terminate unnecessary background applications and disable non-essential startup programs. Free up storage space by removing unused files. If the issue persists, reinstall the operating system and HMI application on a new CompactFlash card.

Panel PC shuts down unexpectedly or displays thermal warning

Check the ambient temperature around the Panel PC installation. Inspect the ventilation slots for dust blockage. Verify that the internal fan is operating by listening for fan noise during startup.

Clean the ventilation slots with compressed air. Ensure the installation environment does not exceed 45 degrees C. Replace the internal cooling fan if it is not spinning or is making abnormal noise.

Condition	Repair, Used, Refurbished, New in box (sealed)