Siemens 6AV7611-0AF32-0CH0 SIMATIC Panel PC 670

Name: Siemens 6AV7611-0AF32-0CH0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7611-0AF32-0CH0
Price: 1770.00 EUR
Availability: InStock

€ 1.770,00

Condition

Clear

SKU: 6AV7611-0AF32-0CH0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7611-0AF32-0CH0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted PC designed for demanding human-machine interface (HMI) and visualization tasks in automation environments. This unit combines a touch-enabled display with a full PC architecture, enabling both operator control and data processing within a single rugged enclosure.

The SIMATIC Panel PC 670 6AV7611-0AF32-0CH0 features a 12-inch TFT color display with a resistive touch screen interface, supporting a resolution of 800 x 600 pixels (SVGA). It is based on an x86-compatible processor architecture and runs Microsoft Windows operating systems, allowing standard SCADA and HMI software such as Siemens WinCC to be deployed directly on the device. The unit provides communication interfaces including Ethernet (RJ45) and serial ports, and supports expansion via standard PC interfaces such as USB and PCI slots. The front panel is rated to IP65 for protection against dust and water ingress.

The SIMATIC Panel PC 670 is widely used in manufacturing automation, process control, and machine tool applications where a combined visualization and computing platform is required. Its rugged industrial design makes it suitable for installation in control cabinets and machine panels in industries such as automotive, food and beverage, chemical processing, and general factory automation. The panel-mount form factor and IP65 front protection allow deployment in environments with elevated levels of dust and moisture.

Technical Specifications

Display Size	12 inch
Display Resolution	800 x 600 pixels (SVGA)
Display Type	TFT Color LCD
Touch Technology	Resistive Touch Screen
Input Voltage	24 V DC
IP Protection Rating (Front)	IP65
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 60 °C
Relative Humidity	5% to 95% (non-condensing)
Communication Interface	Ethernet (RJ45), RS-232, USB
Operating System	Microsoft Windows XP / Windows 2000
Mounting	Panel Mount
Series/Product Family	SIMATIC Panel PC 670
Certifications	CE, UL

Common Error Codes & System Events

Event ID: 100: System startup failure – the Panel PC fails to complete the boot sequence, often due to a corrupted operating system or failed storage medium.
Check the hard disk or CompactFlash card for errors. Reinstall or restore the operating system image if the storage medium is intact, or replace the storage device.
Event ID: 1000: Application crash – a running HMI or SCADA application (e.g. WinCC) has terminated unexpectedly.
Review the Windows Event Viewer for application error details. Reinstall the affected software or apply the relevant software patch. Check for memory or hardware faults.
Event ID: 7000: Service failed to start – a required Windows service did not start during boot, which may prevent HMI software from launching.
Check the Windows Event Viewer for the specific service name. Verify service dependencies and startup configuration. Reinstall the service or associated software if necessary.
Communication Error: Loss of communication between the Panel PC and the connected PLC or automation controller via Ethernet or serial interface.
Verify network cable connections and IP address configuration. Check firewall settings and ensure the correct communication driver is installed and configured in the HMI software.
Watchdog Timeout: The hardware watchdog timer has triggered a system reset due to the operating system or application becoming unresponsive.
Investigate the cause of the system hang by reviewing event logs. Check CPU load, memory usage, and application stability. Update drivers or software if recurring.
Temperature Warning: The internal temperature of the Panel PC has exceeded the recommended operating threshold.
Check that ventilation slots are not blocked. Verify ambient temperature is within specification. Clean internal fans or heat sinks if accessible. Ensure the control cabinet has adequate cooling.
Hard Disk Failure: The internal hard disk drive or storage medium has reported errors or is no longer detected by the BIOS.
Replace the hard disk drive or CompactFlash storage card. Restore the operating system and HMI software from a backup image. Consider upgrading to a solid-state storage solution for improved reliability.
Display Backlight Failure: The LCD backlight has failed or dimmed significantly, resulting in a dark or unreadable display.
Replace the backlight inverter board or the LCD backlight lamp. If the full display assembly requires replacement, use a compatible Siemens spare part for the SIMATIC Panel PC 670 series.

Frequently Asked Questions

What operating system does the 6AV7611-0AF32-0CH0 support?

The SIMATIC Panel PC 670 6AV7611-0AF32-0CH0 supports Microsoft Windows XP and Windows 2000, allowing standard industrial HMI and SCADA software to be installed directly on the device.

What is the display size and resolution of this Panel PC?

This unit features a 12-inch TFT color display with a resolution of 800 x 600 pixels (SVGA) and a resistive touch screen interface.

What is the front panel protection rating of this unit?

The front panel of the 6AV7611-0AF32-0CH0 is rated to IP65, providing protection against dust ingress and low-pressure water jets, making it suitable for industrial panel-mount installations.

Is this Panel PC compatible with Siemens WinCC?

Yes, the SIMATIC Panel PC 670 is compatible with Siemens WinCC and other SIMATIC HMI software packages, as it runs a standard Windows operating system on an x86-compatible architecture.

What communication interfaces are available on this device?

The unit provides Ethernet (RJ45), RS-232 serial, and USB interfaces, enabling connectivity to PLCs, automation networks, and peripheral devices.

Troubleshooting

Panel PC does not power on after supply voltage is applied

Measure the 24 V DC supply voltage at the power input connector. Check for blown internal fuses on the power supply board.

Ensure the supply voltage is stable and within the 24 V DC specification. Replace any blown fuses with the correct rated type. If the internal power supply module is faulty, replace it with a compatible spare.

Touch screen does not respond or registers incorrect touch positions

Check whether the touch screen calibration has been lost. Inspect the touch screen connector cable for damage or loose connection.

Recalibrate the resistive touch screen using the Windows touch screen calibration utility. If calibration does not resolve the issue, inspect and reseat the touch screen ribbon cable or replace the touch screen assembly.

Display is blank but the Panel PC appears to be running (HDD activity, network communication active)

The LCD backlight or backlight inverter may have failed. Connect an external monitor via the VGA output to confirm the PC is operating normally.

If the external monitor shows normal output, replace the backlight inverter board or the LCD backlight lamp. If no external video output is present, investigate the graphics driver or hardware.

Panel PC boots to BIOS but fails to load the operating system

The hard disk drive or CompactFlash storage card may be corrupted or failed. Enter BIOS setup to verify whether the storage device is detected.

If the storage device is not detected, replace the hard disk or CompactFlash card. If detected but corrupted, restore the operating system from a Siemens recovery image or a verified backup.

Frequent unexpected system reboots or blue screen errors (BSOD)

Check Windows Event Viewer and minidump files for error codes. Inspect RAM modules for faults and verify that all internal connectors are seated correctly.

Run a memory diagnostic tool to test RAM integrity. Reseat or replace faulty RAM modules. Update or reinstall device drivers if driver-related stop errors are identified. Ensure the operating system and HMI software are up to date.

Condition	Repair, Used, Refurbished, New in box (sealed)