Siemens 6AV7611-0AA10-0CG0 SIMATIC Panel PC 670

Name: Siemens 6AV7611-0AA10-0CG0 SIMATIC Panel PC 670
Brand: Siemens
SKU: 6AV7611-0AA10-0CG0
Price: 1770.00 EUR
Availability: InStock

€ 1.770,00

Condition

Clear

SKU: 6AV7611-0AA10-0CG0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7611-0AA10-0CG0 is a Panel PC belonging to the SIMATIC Panel PC 670 series, manufactured by Siemens. It is an industrial panel-mounted PC designed for demanding human-machine interface (HMI) and visualization tasks in automation environments. This unit combines a built-in display with a full PC architecture, enabling advanced process visualization, data acquisition, and control functions.

The SIMATIC Panel PC 670 (6AV7611-0AA10-0CG0) features a 12-inch TFT display with a resolution of 800 x 600 pixels (SVGA) and 64,000 colors, providing clear process visualization. It is equipped with an Intel Celeron processor and runs on a Windows-based operating system, supporting SIMATIC WinCC and other SCADA/HMI software packages. The unit includes standard PC interfaces such as USB, serial (RS-232), parallel, and Ethernet ports, and is designed for panel mounting with an IP65 protection rating on the front face. An integrated CompactFlash slot and hard disk drive option provide flexible storage configurations.

The SIMATIC Panel PC 670 is widely used in manufacturing, automotive, food and beverage, and process industries where a full PC-based HMI platform is required. Its rugged industrial design and compatibility with Siemens SIMATIC software make it suitable for integration into existing SIMATIC automation architectures. The unit is typically deployed at operator stations, control panels, and supervisory workstations where advanced visualization and data logging capabilities are needed.

Technical Specifications

Display Size	12 inch
Display Resolution	800 x 600 pixels (SVGA)
Display Colors	64,000 colors
Display Type	TFT LCD
Input/Operating Voltage	24 V DC
IP/Protection Rating	IP65 (front), IP20 (rear)
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 60 °C
Relative Humidity	5% to 95% (non-condensing)
Communication Interface	Ethernet (RJ45), RS-232, USB, Parallel
Mounting	Panel mounting
Series/Product Family	SIMATIC Panel PC 670
Certifications	CE, UL
Storage	CompactFlash slot, Hard disk drive (optional)

Common Error Codes & System Events

Event ID: 100: System startup error — the operating system failed to load correctly during boot.
Check the hard disk or CompactFlash card for integrity. Reboot the unit; if the error persists, reinstall the operating system or replace the storage medium.
Event ID: 1000: Application fault — a running HMI or SCADA application (e.g. WinCC) has crashed unexpectedly.
Restart the application. Check the Windows Event Viewer for detailed error logs. Update or reinstall the HMI software if the fault recurs.
Event ID: 7000: Service failed to start — a required Windows service did not start during system initialization.
Open Windows Services manager, locate the failed service, and attempt a manual start. Check for software conflicts or corrupted service files.
Communication Error: Loss of communication between the Panel PC and connected PLC or automation controller.
Verify Ethernet or serial cable connections. Check IP address configuration and network settings. Confirm the PLC is powered and running.
Watchdog Timeout: The system watchdog timer has triggered, indicating the CPU or application became unresponsive.
Perform a controlled restart of the Panel PC. Investigate CPU load and running processes. Reduce background tasks or upgrade memory if overload is recurring.
Temperature Warning: Internal temperature of the Panel PC has exceeded the recommended operating threshold.
Check that ambient temperature is within the 0–45 °C operating range. Clean ventilation openings and ensure adequate airflow around the unit. Verify the cooling fan (if fitted) is operational.
Hard Disk Error: Read/write error detected on the internal hard disk drive.
Run a disk diagnostic utility. Back up data immediately. Replace the hard disk drive if errors persist, and restore the system image.
Display Backlight Failure: The TFT display backlight has failed or dimmed significantly, resulting in a dark or unreadable screen.
Check display cable connections internally. Replace the backlight inverter board or the display assembly if the backlight does not illuminate after reconnection.

Frequently Asked Questions

What operating system does the SIMATIC Panel PC 670 (6AV7611-0AA10-0CG0) support?

The 6AV7611-0AA10-0CG0 is designed to run Windows XP Embedded or Windows 2000, supporting SIMATIC WinCC and other compatible HMI/SCADA software packages.

What is the supply voltage for this Panel PC?

The unit operates on a 24 V DC supply voltage, which is standard for industrial panel-mounted devices in SIMATIC environments.

What is the front panel protection rating of this unit?

The front panel of the 6AV7611-0AA10-0CG0 carries an IP65 protection rating, making it resistant to dust and water jets, suitable for industrial panel installations.

Is this Panel PC compatible with Siemens WinCC?

Yes, the SIMATIC Panel PC 670 is fully compatible with Siemens SIMATIC WinCC and other SIMATIC HMI software, and is designed to integrate into SIMATIC automation architectures.

What storage options are available on this unit?

The 6AV7611-0AA10-0CG0 includes a CompactFlash slot for solid-state storage and supports an internal hard disk drive for larger data storage and operating system installation.

Troubleshooting

Panel PC does not power on after switching on the 24 V DC supply

Measure the 24 V DC supply voltage at the power input connector. Check for blown internal fuses and verify the power supply unit output.

Ensure the supply voltage is stable and within the 24 V DC specification. Replace any blown fuses with the correct rating. If the internal power supply module is faulty, replace it.

Display is blank or shows no image after power on

Check whether the system is booting by listening for hard disk activity or connecting an external monitor if supported. Inspect the display cable connection internally and test the backlight inverter.

Reseat the display cable connectors. Replace the backlight inverter if the backlight is not illuminating. If the display panel itself is damaged, replace the TFT display assembly.

Touchscreen does not respond or is inaccurate

Check the touchscreen controller driver in Windows Device Manager. Verify the touchscreen ribbon cable connection. Attempt a touchscreen recalibration using the Windows control panel or SIMATIC calibration utility.

Recalibrate the touchscreen through the operating system. If the touchscreen remains unresponsive, check and reseat the ribbon cable. Replace the touchscreen overlay if physical damage or controller failure is confirmed.

Loss of communication with connected PLC or SCADA system

Verify the Ethernet or serial cable is securely connected. Check the IP address and subnet mask configuration in Windows network settings. Ping the PLC from the Panel PC to test network connectivity.

Correct any IP address conflicts or misconfiguration. Replace the network cable if damaged. If the Ethernet port is faulty, use an alternative network interface card if the unit supports expansion, or repair the onboard Ethernet controller.

System freezes or reboots unexpectedly during operation

Check the Windows Event Viewer for critical errors or watchdog timeout events. Monitor CPU and memory usage to identify overload conditions. Inspect the hard disk for errors using a diagnostic utility.

Reduce the number of running background processes. Ensure the operating system and HMI software are up to date with patches. Replace the hard disk if disk errors are found, and consider upgrading RAM if memory overload is the cause.

Condition	Repair, Used, Refurbished, New in box (sealed)