Siemens 6AV7452-7AA00-0BT0 SIMATIC IPC477C

Name: Siemens 6AV7452-7AA00-0BT0 SIMATIC IPC477C
Brand: Siemens
SKU: 6AV7452-7AA00-0BT0
Price: 2299.00 EUR
Availability: InStock

€ 2.299,00

Condition

Clear

SKU: 6AV7452-7AA00-0BT0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV7452-7AA00-0BT0 is a panel PC belonging to the SIMATIC IPC477C series, manufactured by Siemens as part of their industrial computing portfolio. This unit is a 15-inch industrial panel PC designed for demanding automation and process visualization environments, combining computing power with a rugged, panel-mount form factor. It is intended for use as an operator station, HMI terminal, or industrial workstation in both discrete and process manufacturing applications.

The SIMATIC IPC477C features a 15-inch TFT display with a resistive touchscreen interface, supporting a resolution of 1024 x 768 pixels (XGA). The unit is powered by an Intel Core 2 Duo or Celeron processor depending on the configuration, and supports Windows-based operating systems including Windows XP Professional and Windows Embedded Standard. It provides communication interfaces including Ethernet (RJ45), USB ports, and serial interfaces, and is designed for integration with Siemens SIMATIC software environments such as WinCC. The panel is built to IP65 protection on the front face, making it suitable for installation in control cabinet doors exposed to dust and water spray.

The IPC477C is widely deployed in the automotive, food and beverage, chemical, and pharmaceutical industries, where reliable operator interface hardware with long-term availability is essential. Its panel-mount design allows direct integration into machine control panels and control room consoles. The combination of industrial-grade hardware, compatibility with Siemens automation software, and robust environmental protection makes it a practical choice for SCADA, MES, and machine-level HMI applications.

Technical Specifications

Display Size	15 inch
Display Resolution	1024 x 768 px (XGA)
Display Type	TFT LCD
Display Colors	16.7 million
Touch Technology	Resistive touchscreen
Input/Operating Voltage	24 V DC
Power Consumption	Approx. 65 W
IP/Protection Rating	IP65 (front), IP20 (rear)
Operating Temperature	0 °C to +45 °C
Storage Temperature	-20 °C to +60 °C
Relative Humidity	5% to 90% (non-condensing)
Communication Interface	2x Ethernet RJ45, 4x USB, 1x RS-232
Mounting	Panel mount
Certifications	CE, UL, cULus
Series/Product Family	SIMATIC IPC477C

Common Error Codes & System Events

Event ID: 100: Operating system startup failure or boot error detected during POST sequence.
Check hard disk or SSD integrity, verify boot device order in BIOS, and replace storage media if corrupted.
Event ID: 101: Memory error detected during system initialization.
Reseat RAM modules, test with known-good memory, and replace defective RAM if fault persists.
Event ID: 200: Fan failure or thermal warning — cooling fan not operating within specification.
Inspect and clean the cooling fan, check for obstructions, and replace the fan unit if it is not spinning correctly.
Event ID: 201: CPU temperature exceeded safe operating threshold.
Verify ambient temperature is within specification, clean heat sink and fan assembly, and ensure adequate ventilation around the panel.
Event ID: 300: Hard disk or storage device not detected or read error.
Check storage device connections, replace hard disk or SSD if faulty, and restore operating system from backup media.
Event ID: 400: Ethernet communication link failure — no network connection established.
Check Ethernet cable and switch port, verify IP configuration in Windows network settings, and test with a replacement cable.
Event ID: 500: Touchscreen calibration error or touch input not responding correctly.
Recalibrate the touchscreen via the Windows control panel or Siemens touchscreen calibration utility, and check the touch controller ribbon cable connection.
Event ID: 600: UPS or power supply voltage out of range — input voltage below or above 24 V DC nominal.
Measure the 24 V DC supply at the power connector, verify the power supply unit output, and replace the PSU if voltage is outside the 20.4–28.8 V DC tolerance range.

Frequently Asked Questions

What operating systems are supported by the SIMATIC IPC477C 6AV7452-7AA00-0BT0?

The IPC477C supports Windows XP Professional and Windows Embedded Standard. Some configurations may also support Windows 7 depending on the processor and memory variant ordered.

What is the front panel protection rating of this unit?

The front panel of the 6AV7452-7AA00-0BT0 carries an IP65 protection rating, making it resistant to dust ingress and water jets when correctly installed in a panel cutout.

Is this panel PC compatible with Siemens WinCC?

Yes, the SIMATIC IPC477C is fully compatible with Siemens WinCC and WinCC flexible HMI software, and is a standard hardware platform for Siemens SCADA and operator station applications.

What is the supply voltage for this panel PC?

The unit operates on a 24 V DC supply, which is standard for Siemens industrial panel PCs and compatible with typical control cabinet power distribution.

Can the touchscreen be used with gloves?

The resistive touchscreen technology used in this unit can be operated with gloved hands or a stylus, as it responds to pressure rather than capacitive touch.

Troubleshooting

Display remains blank after power is applied

Check that the 24 V DC supply is present and within tolerance at the power connector. Verify that the power LED indicator is active. Inspect the internal display cable connection between the mainboard and the LCD panel.

Restore the 24 V DC supply to within specification (20.4–28.8 V DC). If the supply is correct and the display remains blank, reseat the display cable or replace the backlight inverter or LCD panel as required.

Touchscreen does not respond or registers incorrect touch positions

Attempt to operate the unit using a USB mouse to confirm the operating system is running. Access the touchscreen calibration utility in the Windows control panel to check calibration status.

Recalibrate the touchscreen using the Siemens or Windows calibration tool. If calibration fails, inspect the touch controller ribbon cable for damage and replace the touch overlay or controller board if necessary.

Unit fails to boot and displays a BIOS POST error

Observe the error message displayed during POST. Check whether the hard disk or SSD is detected in the BIOS setup menu. Listen for unusual sounds from the storage device.

Replace the hard disk or SSD if it is not detected or is reporting errors. Reinstall the operating system from Siemens recovery media or a backup image. Verify that all internal connectors are seated correctly.

Ethernet communication is not established

Check the Ethernet port LEDs for link activity. Verify the IP address configuration in Windows Network Connections. Test the cable with a known-good device.

Replace the Ethernet cable and verify switch port configuration. If the port LEDs remain inactive, update the network adapter driver or replace the mainboard if the NIC is faulty.

Unit overheats and shuts down unexpectedly

Check the ambient temperature around the panel installation. Inspect the rear ventilation area for blockages. Verify that the internal cooling fan is operating.

Ensure the installation environment does not exceed 45 °C ambient. Clean dust from the fan and ventilation slots. Replace the cooling fan if it is not running, and verify that the panel cutout seal is not trapping heat inside the enclosure.

Condition	Repair, Used, Refurbished, New in box (sealed)