Siemens 6AV6341-1BA03-0AY0 OP17

€ 1.995,00

SKU: 6AV6341-1BA03-0AY0 Category: HMI & Display Brand: Siemens

Description
Additional information

The Siemens 6AV6341-1BA03-0AY0 is an OP17 operator panel belonging to the SIMATIC HMI family of operator panels. It is a compact, text-based operator panel designed for machine-level human-machine interface applications, providing operators with a straightforward means of monitoring and controlling industrial processes. This unit is part of the OP17 series, which was developed for use with Siemens SIMATIC S5 and S7 programmable logic controllers.

The OP17 panel features a multi-line LCD text display capable of showing alphanumeric characters, enabling the display of process values, alarm messages, and status information. It supports communication via the MPI (Multi-Point Interface) and PROFIBUS-DP protocols, allowing direct integration with SIMATIC S7-200, S7-300, and S7-400 PLCs. The panel includes a membrane keypad with function keys for operator input, and configuration is performed using the ProTool software package. It operates on a 24 V DC supply and is designed for front-panel mounting with an IP65 protection rating on the front face.

The OP17 is widely used in manufacturing, packaging, and process automation environments where a cost-effective, reliable text-based operator interface is required. It is particularly suited for machine-level control panels in industries such as food and beverage, automotive assembly, and general factory automation. Its compact form factor and robust construction make it appropriate for installation in control cabinets and machine enclosures with limited space.

Technical Specifications

Display Type	LCD, text-based
Display Lines	4 lines
Characters per Line	20 characters
Input/Operating Voltage	24 V DC
Power Consumption	Approx. 6 W
Communication Interface	MPI, PROFIBUS-DP, RS-232
IP Rating (Front)	IP65
IP Rating (Rear)	IP20
Operating Temperature	0 °C to 50 °C
Storage Temperature	-20 °C to 60 °C
Relative Humidity	10% to 90%, non-condensing
Mounting	Front panel mounting
Certifications	CE, UL
Series/Product Family	SIMATIC HMI OP17

Common Error Codes & System Events

System Event 10000: Communication error between the OP17 and the connected PLC. The panel cannot establish or maintain a connection.
Check MPI or PROFIBUS-DP cable connections and termination resistors. Verify the PLC address settings and baud rate configuration match those set in ProTool.
System Event 10001: PLC not responding or connection to the PLC has been lost during operation.
Verify PLC is powered and in RUN mode. Check physical cable integrity and connector seating. Confirm network address configuration.
System Event 10002: Data record transfer error. A read or write operation to the PLC failed.
Check PLC program for correct data block addresses referenced in the OP17 project. Ensure the PLC data areas are not write-protected.
System Event 20000: Internal device error or configuration file could not be loaded from memory.
Re-transfer the project configuration from ProTool to the OP17. If the error persists, perform a memory reset and re-download the project.
System Event 40000: Alarm buffer overflow. More alarms have been generated than the buffer can store.
Acknowledge and clear pending alarms. Review the alarm configuration in ProTool to reduce the frequency or number of simultaneous alarms.
System Event 70010: Incorrect or incompatible project file detected on the panel.
Re-download a compatible project file using the correct version of ProTool software. Verify the target device selected in ProTool matches the OP17 hardware.
System Event 70011: Panel memory error detected during startup self-test.
Perform a complete memory reset via the panel's system menu and re-transfer the project. If the fault persists, the internal memory module may require replacement.

Frequently Asked Questions

Which PLCs are compatible with the Siemens OP17 (6AV6341-1BA03-0AY0)?

The OP17 is compatible with Siemens SIMATIC S7-200, S7-300, and S7-400 PLCs via MPI or PROFIBUS-DP interfaces. It also supports connection to S5 PLCs via RS-232 with appropriate configuration.

What software is used to configure and program the OP17 panel?

The OP17 is configured using Siemens ProTool software. Projects are created on a PC and then downloaded to the panel via a serial or MPI connection.

What is the supply voltage for the 6AV6341-1BA03-0AY0?

The OP17 operates on a 24 V DC supply voltage, which is standard for SIMATIC HMI operator panels.

What is the front panel protection rating of the OP17?

The front face of the OP17 achieves an IP65 protection rating when correctly installed with the supplied sealing gasket, making it suitable for environments with dust and water spray.

Can the OP17 display graphical content or images?

No, the OP17 is a text-based operator panel and is limited to displaying alphanumeric characters and special symbols. It does not support graphical or bitmap image display.

Troubleshooting

Display remains blank after power is applied

Measure the 24 V DC supply voltage at the power connector on the rear of the panel. Check for blown internal fuse or wiring polarity errors.

Correct any wiring faults and ensure the supply voltage is within the 24 V DC tolerance range. If the supply is correct and the display remains blank, the internal power supply or display backlight may be faulty and require repair or unit replacement.

Panel displays 'No connection to PLC' or communication error on startup

Check the MPI or PROFIBUS-DP cable between the OP17 and the PLC. Verify bus termination is correctly applied at both ends of the network segment.

Replace or reseat the communication cable. Confirm the PLC station address and baud rate in the OP17 project match the PLC configuration. Ensure the PLC is powered and in RUN mode.

Project download from ProTool fails or is interrupted

Check the serial or MPI cable connection between the programming PC and the OP17. Verify the correct COM port and transfer settings are selected in ProTool.

Use a known-good transfer cable and confirm the OP17 is in transfer mode via its system menu. Ensure the ProTool project version is compatible with the OP17 firmware version.

Keypad buttons are unresponsive or intermittently fail

Inspect the membrane keypad for physical damage, contamination, or wear. Test each key systematically using the panel's built-in key test function in the system menu.

Clean the keypad surface with a dry cloth. If individual keys are confirmed faulty, the membrane keypad assembly may need to be replaced as a service part.

Alarm messages are not displayed or are displayed incorrectly

Review the alarm configuration in the ProTool project to verify that the correct PLC bit addresses are assigned to each alarm. Check that the PLC program is correctly setting the alarm bits.

Correct any address mismatches in the ProTool project and re-download to the panel. Verify PLC logic is functioning as intended using the PLC programming software online monitoring tools.

Condition	Repair, Used, Refurbished, New in box (sealed)