Baumuller BM4423-ST1-01200-03
€ 3.544,00
Baumuller repareren bij Cirele is:
• Duidelijke tarieven zonder onverwachte kosten
• Betaling pas na geslaagde reparatie
• Proactieve vervanging van tijdgevoelige onderdelen
• Gedetailleerd test- en reparatierapport wordt verstrekt
• 2 jaar garantie op alle reparaties
• Langdurige ondersteuning tot einde levensduur.
Heeft uw Baumuller BM4423-ST1-01200-03 een defect of werkt het niet naar behoren? Wij voeren vakkundige reparaties uit en kunnen het product op bestelling leveren: nieuw, gebruikt of refurbished. Wij repareren de elektronica op locatie of in onze eigen werkplaats.
Heeft u spoed? Maak gebruik van onze speciale spoedlijn voor een snelle oplossing.
| Condition |
|---|
Common defects
Common defects on a Baumuller BM4423-ST1-01200-03 are:
Power Supply Related Issues
- No power / drive not turning on
- Blown fuses
- Defective rectifier bridge
- Damaged DC bus capacitors
- IGBT / MOSFET module failure
- Overvoltage / undervoltage errors
Control & Electronics Failures
- Faulty control board or PCB damage
- Firmware or memory corruption
- Fieldbus communication errors (Profibus, Modbus, EtherCAT, CANopen)
- Input / output circuit damage
- Gate driver module failure
Motor Control Problems
- Motor not starting or no output
- Unstable speed control
- No torque output
- Trip during acceleration or deceleration
- Encoder feedback errors
Thermal & Cooling Defects
- Overheating due to failed cooling fans
- Defective temperature sensors
- Poor heatsink performance
Mechanical & Environmental Damage
- Burnt or loose connectors
- PCB track damage
- Corrosion or moisture ingress
- Oil, dust or contamination damage
- Cracked solder joints
Error Codes & Drive Trips
- Overcurrent faults (OC)
- Ground fault / earth leakage error
- Short-circuit fault
- Motor or drive overload
- Overvoltage or undervoltage error
- Undervoltage trip when starting or stopping
- Phase loss / imbalance
- Synchronization issues with multiple drives
Other
- Display defect
- Control keys or keypad not working
- Parameters no longer readable or lost
- Brake resistor problems (brake chopper defect)
- Internal relays/contactors defective
- EMI/RFI interference due to defective filters
Common defects
Common defects on a Baumuller BM4423-ST1-01200-03 are:
- Damaged or broken housing
- Unresponsive or defective touchscreen (repair or replacement)
- Defective display or LCD screen (repair or replacement)
- Damaged protective film
- Backlight failure
- Power supply problems
- Defective or damaged circuit board (incl. component replacement)
- Defective communication ports (LAN, Profibus, MPI, serial, CAN)
- Software issues (failure to start, backup creation, software recovery)
Related products
-
Siemens HMI 6AG1642-0BD01-2AX0
€ 719,00Repair at Cirele is:• Fixed price, no surprises afterwards• Payment only upon successful repair• Time-sensitive components are replaced preventively• You will receive a test and repair report• 2 year warranty on the repair• Support up to end of life.Siemens SIPLUS HMI TP 177B 4″ color PN/DP based on 6AV6642-0BD01-3AX0 with conformal coating
-
Siemens HMI 6AV3627-1NK00-0AX0
€ 770,00Repair at Cirele is:• Fixed price, no surprises afterwards• Payment only upon successful repair• Time-sensitive components are replaced preventively• You will receive a test and repair report• 2 year warranty on the repair• Support up to end of life.Siemens Touch panel TP27-6 6″ STN monochrome LC display 1 MB flash-EPROM.
-
Siemens HMI 6AV3627-1QK00-0AX0
Price range: € 649,00 through € 889,00Repair at Cirele is:• Fixed price, no surprises afterwards• Payment only upon successful repair• Time-sensitive components are replaced preventively• You will receive a test and repair report• 2 year warranty on the repair• Support up to end of life.Siemens Touch Panel TP27-6 6” STN Color LC Display 1 MB flash-EPROM
