Mitsubishi Q32-STN-Cab
€ 9,00
Mitsubishi repareren bij Cirele is:
• Duidelijke tarieven zonder onverwachte kosten
• Betaling pas na geslaagde reparatie
• Proactieve vervanging van tijdgevoelige onderdelen
• Gedetailleerd test- en reparatierapport wordt verstrekt
• 2 jaar garantie op alle reparaties
• Langdurige ondersteuning tot einde levensduur.
Mitsubishi Q32-STN-Cab – Communication Cable for MELSEC System Q
The Mitsubishi Q32-STN-Cab is a specialized communication cable designed for use with MELSEC System Q series components, particularly for connecting GOT (Graphical Operator Terminal) HMIs to Q-series PLCs. It ensures reliable data transmission and simplified plug-and-play integration between devices.
- Manufacturer: Mitsubishi Electric
- Model: Q32-STN-Cab
- Type: Communication Cable
- Application: Connecting GOT HMI to MELSEC Q-series PLC
- Connector Type: 9-pin D-sub (RS-232C) to dedicated Q-series port
- Interface: RS-232C serial communication
- Cable Length: Typically 3 meters (may vary by version)
- Compatibility: GOT1000/GOT2000 series, Q-series CPUs with serial ports
- Shielding: Shielded for noise reduction in industrial environments
- Operating Temperature: 0°C to +50°C
- Use Case: Programming, monitoring, or HMI-PLC communication
- Compliance: CE, RoHS
The Q32-STN-Cab simplifies HMI-PLC integration by providing a reliable and interference-resistant connection, making it a practical choice for Mitsubishi automation systems.
| Condition |
|---|
Common defects
Common defects on a Mitsubishi Q32-STN-Cab are:
Power Supply & Hardware
- No power / PLC not starting
- Blown fuses or power components
- Faulty internal power supply module
- Overheating due to poor cooling or fan failure
- Damaged capacitors or power circuits
Input & Output (I/O) Failures
- Digital inputs not responding
- Analog inputs showing incorrect values
- Digital outputs not switching or stuck
- Burnt or damaged relay / transistor outputs
- I/O modules not recognized or defective
Communication Problems
- No communication with HMI or SCADA
- Network issues (Profibus, Profinet, Modbus, Ethernet/IP, CAN, etc.)
- Serial communication (RS232/RS485) failure
- Fieldbus module malfunction
- Outdated or incompatible firmware causing errors
Memory & Software Issues
- Lost parameters or corrupted programs (EEPROM/Flash failure)
- PLC loses program after power-down
- Firmware corruption or software errors
- Faulty or empty backup battery
- Errors during upload/download of program
CPU & Processing Errors
- PLC freezes or resets unexpectedly
- CPU not responding to commands
- Error messages during startup or runtime
- Watchdog timer faults or internal CPU errors
- Synchronization issues with other modules
Mechanical & Physical Damage
- Broken PCB tracks or connectors
- Corrosion due to moisture or chemicals
- Contamination from dust, oil, or dirt
- Burnt components or discolored boards
- Poor solder joints (dry joints)
Other Failures
- Faulty display or diagnostic LEDs
- Non-functional buttons or keypad
- Expansion modules not detected
- Defective internal clock or timers
- EMI/RFI noise due to damaged filters
Related products
-
Siemens Simatic S7 6ES7318-3FL00-0AB0
€ 1.650,00Siemens repair at Cirele is:
• Clear pricing with no surprises
• Payment only after successful repair
• Proactive replacement of time-sensitive components
• Detailed testing and repair report provided
• 2-year warranty on all repairs
• Long-term support until end of life -
Siemens Simatic S5 6ES5988-3NB41
Repairing Siemens at Cirele is:– Clear rates with no unexpected fees- Payment only after successful repair- Proactive replacement of time-sensitive parts- Detailed test and repair report is provided- 2-year warranty on all repairs- Long-term support until end of life.
€ 128,00 -
Siemens Simatic 6GK5208-0BA10-2AA3
Siemens repair at Cirele is:
• Clear pricing with no surprises
• Payment only after successful repair
• Proactive replacement of time-sensitive components
• Detailed testing and repair report provided
• 2-year warranty on all repairs
• Long-term support until end of life