
Siemens 6ES7633-2BJ02-0AE3 SIMATIC C7-633
€ 1.353,00 – € 1.817,28Price range: € 1.353,00 through € 1.817,28
The Siemens SIMATIC C7-633, part number 6ES7633-2BJ02-0AE3, is a compact combined controller and operator panel unit belonging to the SIMATIC C7 product family. It integrates a SIMATIC S7-300 CPU with an HMI operator panel into a single housing, eliminating the need for separate PLC and display hardware. This all-in-one design is intended for space-constrained control cabinet installations where both control logic and operator interaction are required in one device.
The C7-633 features a built-in monochrome STN LCD display with touch or key-based operation depending on the variant, and supports MPI (Multi-Point Interface) for communication with other SIMATIC devices and programming via STEP 7. It includes integrated digital and analog I/O, onboard CPU functionality compatible with the S7-300 instruction set, and supports PROFIBUS-DP for field-level communication. The unit operates on 24 V DC supply voltage and is designed for panel mounting with a defined cutout dimension, conforming to standard industrial enclosure requirements.
The SIMATIC C7-633 is widely used in machine automation, packaging equipment, conveyor systems, and small to mid-scale process control applications where a compact footprint is essential. Its integration of PLC and HMI functionality makes it suitable for OEM machine builders seeking to reduce panel space and wiring complexity. Industries such as food and beverage, automotive assembly, and general manufacturing commonly deploy this unit for local control and visualization tasks.
Technical Specifications
| Series | SIMATIC C7 |
|---|---|
| Integrated CPU | S7-300 compatible |
| Display Type | Monochrome STN LCD |
| Input/Operating Voltage | 24 V DC |
| Communication Interface | MPI, PROFIBUS-DP |
| Programming Software | STEP 7 |
| Digital Inputs | 16 |
| Digital Outputs | 16 |
| Analog Inputs | 4 |
| Analog Outputs | 2 |
| Operating Temperature | 0 °C to +55 °C |
| Storage Temperature | -20 °C to +70 °C |
| Protection Rating | IP 65 (front panel) |
| Mounting | Panel mounting |
| Certifications | CE, UL |
Common Error Codes & System Events
- Event ID: 16# 0000
- No error present; system operating normally.
No action required. Monitor system for recurring events. - Event ID: 16# 4000
- CPU in STOP mode due to programming error or user-initiated stop.
Check STEP 7 diagnostics buffer for cause. Correct program error and restart CPU. - Event ID: 16# 2521
- I/O access error — peripheral module not responding or address conflict.
Verify I/O module addressing in hardware configuration. Check wiring and module seating. - Event ID: 16# 2533
- Module failure detected on integrated I/O or expansion module.
Inspect expansion modules for proper connection. Replace faulty module if hardware fault is confirmed. - Event ID: 16# 1215
- Communication error on MPI or PROFIBUS-DP interface.
Check MPI/PROFIBUS cable connections and termination resistors. Verify bus address settings and baud rate configuration. - Event ID: 16# 3501
- Battery voltage low — backup battery for retentive memory is depleted.
Replace the backup battery as soon as possible to prevent loss of retentive data and real-time clock settings. - Event ID: 16# 4500
- Watchdog timeout — CPU has detected a program cycle time overrun.
Review and optimize the user program cycle time. Increase the watchdog time limit in CPU properties if justified.
Frequently Asked Questions
What CPU functionality does the C7-633 integrate?
The SIMATIC C7-633 integrates an S7-300 compatible CPU, allowing it to be programmed using Siemens STEP 7 software with standard S7-300 instruction sets and hardware configuration tools.
What communication interfaces are available on the 6ES7633-2BJ02-0AE3?
The unit supports MPI (Multi-Point Interface) for programming and inter-device communication, as well as PROFIBUS-DP for connecting to field devices such as distributed I/O and drives.
What is the supply voltage for this unit?
The SIMATIC C7-633 operates on a 24 V DC supply voltage, which must be provided externally and should be within the specified tolerance range.
Can the C7-633 be expanded with additional I/O modules?
Yes, the C7-633 supports expansion with standard S7-300 signal modules (SM) connected via the integrated backplane bus, allowing additional digital and analog I/O capacity.
What is the front panel protection rating of this device?
The front panel of the C7-633 achieves IP 65 protection, making it suitable for installation in environments where dust and water spray may be present.
Troubleshooting
Display remains blank after power is applied
Check the 24 V DC supply voltage at the power connector using a multimeter. Verify that the supply is within the specified tolerance and that the internal fuse is intact.
Restore correct supply voltage if out of range. Replace the internal fuse if blown. If the display remains blank with correct supply, the display backlight or power supply board may require replacement.
CPU remains in STOP mode and cannot be switched to RUN
Access the STEP 7 diagnostics buffer via MPI to read the last stop event. Check for program errors, I/O configuration mismatches, or missing expansion modules.
Correct any identified program errors or hardware configuration mismatches in STEP 7. Ensure all configured I/O modules are present and properly connected before attempting to restart.
Loss of retentive data or real-time clock after power cycle
Check the backup battery voltage. A depleted or missing battery will cause loss of retentive memory contents and clock data on power loss.
Replace the backup battery with the correct Siemens-specified battery type. After replacement, reload retentive data if required and reset the real-time clock.
PROFIBUS-DP communication errors or slaves not recognized
Inspect PROFIBUS cable connections, verify correct bus termination at both ends of the network, and confirm that all slave device addresses match the hardware configuration in STEP 7.
Correct any wiring faults, enable termination resistors only at the physical ends of the bus, and ensure baud rate settings are consistent across all devices on the network.
Touchscreen or operator keys not responding correctly
Check for physical damage to the front panel membrane or touch surface. Verify that the HMI configuration is correctly downloaded and that the project matches the C7-633 hardware version.
Recalibrate the touch interface if supported, or re-download the HMI project. If physical damage is present on the membrane keypad, the front panel assembly may need to be replaced.
| Condition | Repair, Used, Refurbished, New in box (sealed) |
|---|
Related products
-
Siemens 6AV3627-1NK00-2AX0 SIMATIC OP 27
€ 749,00 – € 964,00Price range: € 749,00 through € 964,00Select options This product has multiple variants. The options may be chosen on the product page -
Siemens 6AV6642-5AA00-0QE0 TP177B
€ 394,00Select options This product has multiple variants. The options may be chosen on the product page -
Siemens 6AV6545-0AA15-2AX0 TP 270
€ 399,00 – € 1.149,00Price range: € 399,00 through € 1.149,00Select options This product has multiple variants. The options may be chosen on the product page


